Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

When trying to create a new PDS, I have the primary and secondary allocations both set to 10 cylinders.

The data set itself is an FB 255 but there's one parameter it's asking for which has me flummoxed.

That's the block size. This has defaulted to 27920 but I'm wary of using that value since it also defaulted to FB 80 and I'm worried these two may be related somehow.

How do you calculate a good block size for the PDS or does it not really matter?

share|improve this question
add comment

1 Answer

up vote 2 down vote accepted

It's a while since I've done mainframe work but basically blocksize has an impact on disk utilisation and disk response time. For FB it should be a multiple of the lrecl. Utilisation was related to how many blocks could fit into a track and how well utilised that made the track. For disk response time the recommendation usually came to making the blocksize approximately one half a track. This was probably from 8 years ago and in primarily a non-SAN environment.

share|improve this answer
    
Thanks. As it turns out, I found out I can leave that field blank anyway and DFSMS will choose a half-decent option for me. –  paxdiablo Feb 2 '11 at 9:02
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.