Take the 2-minute tour ×
Server Fault is a question and answer site for system and network administrators. It's 100% free, no registration required.

I have some problems reaching local network , where VPN Windows 2003 server stands. I have a network, which has a VPN server (LAN ip 10.0.0.201). I created a VPN server on that server with different subnet for VPN users (10.0.5.0). After VPN connection is initiated , i am able to acces only 10.0.0.201, but not other PC, which belongs to that network ( all i need to access 10.0.0.203 and 10.0.0.208). I think i need to add somethink to static route table, or not?

C:\Documents and Settings\Administrator>route PRINT

IPv4 Route Table

Active Routes: Network Destination Netmask Gateway Interface Metric

      0.0.0.0          0.0.0.0       10.0.0.254       10.0.0.201     10

     10.0.0.0        255.0.0.0       10.0.0.201       10.0.0.201     10

   10.0.0.201  255.255.255.255        127.0.0.1        127.0.0.1     10

     10.0.5.1  255.255.255.255        127.0.0.1        127.0.0.1     50

10.255.255.255 255.255.255.255 10.0.0.201 10.0.0.201 10

    127.0.0.0        255.0.0.0        127.0.0.1        127.0.0.1      1

    224.0.0.0        240.0.0.0       10.0.0.201       10.0.0.201     10

255.255.255.255 255.255.255.255 10.0.0.201 10.0.0.201 1

Default Gateway: 10.0.0.254

Persistent Routes: None

C:\Documents and Settings\Administrator>ipconfig /all

PPP adapter RAS Server (Dial In) Interface:

Connection-specific DNS Suffix . :

Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface

Physical Address. . . . . . . . . : 00-53-45-00-00-00

DHCP Enabled. . . . . . . . . . . : No

IP Address. . . . . . . . . . . . : 10.0.5.1

Subnet Mask . . . . . . . . . . . : 255.255.255.255

Default Gateway . . . . . . . . . :

Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Network Connection

Physical Address. . . . . . . . . : 00-0E-0C-3D-C9-51

DHCP Enabled. . . . . . . . . . . : No

IP Address. . . . . . . . . . . . : 10.0.0.201

Subnet Mask . . . . . . . . . . . : 255.0.0.0

Default Gateway . . . . . . . . . : 10.0.0.254

DNS Servers . . . . . . . . . . . : 127.0.0.1

Primary WINS Server . . . . . . . : 10.0.0.201

NetBIOS over Tcpip. . . . . . . . : Disabled

VPN Client

PPP adapter VPN Connection 2:

Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VPN Connection 2

Physical Address. . . . . . . . . :

DHCP Enabled. . . . . . . . . . . : No

Autoconfiguration Enabled . . . . : Yes

IPv4 Address. . . . . . . . . . . : 10.0.5.4(Preferred)

Subnet Mask . . . . . . . . . . . : 255.255.255.255

Default Gateway . . . . . . . . . :

DNS Servers . . . . . . . . . . . : 10.0.0.201

Primary WINS Server . . . . . . . : 10.0.0.201

NetBIOS over Tcpip. . . . . . . . : Enabled

share|improve this question

2 Answers 2

Please read through this and this.

share|improve this answer
    
It's recommended to include the most relevant information from the links in your post. –  Lucas Kauffman Jul 20 '12 at 18:41

You need to enable LAN routing in the properties of the RRAS server.

share|improve this answer
    
I hava mikrotik router before Windows server. Port forwarding works fine, but if i make server act as a router, it confuses mikrotik router (dhcp not working, or blocks all connections to VPN server) –  depo Feb 11 '11 at 17:31

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.