Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

Can we configure virtualisation or make virtual machines which has access from and to other outer n/w's using GUI.

Bcoz i tried making VM using command mode,and it didnt work out.So is there anyway i can configure graphically with minimum command mode.

And i am a beginner of Networking Concepts, so i hope you will give a wide expertise.

Thanks

share|improve this question
add comment

1 Answer

up vote 0 down vote accepted

To answer your question - yes, it's possible.

In order to receive detailed answers though, you'd have to provide more details on what you want to achieve and how, and what you have already done so far

share|improve this answer
    
Make 4 Virtual machines with static IP's 192.168.125.22 192.168.125.23 192.168.125.24 192.168.125.25 Through Host Machine with Static IP 192.168.125.19 Using Bridge,bridge0 And Accessible by N/W from 192.168.1.* Can i get a general idea,How this is possible in RHEL6 with KVM. The Problem is i made VM's with Static IP, But i couldnt access to other N/W from this VM and not access from other N/W this VM's. –  nicepuli Feb 14 '11 at 10:06
    
I really dont understand where i messed it.Bcoz i was using more of command mode operations.I want to start from beginning with GUI.So is there a possibility of creating this with more GUI and less Commands. –  nicepuli Feb 14 '11 at 10:06
    
Thanks dyasny for the response, and please try to help me out. –  nicepuli Feb 14 '11 at 10:07
    
make sure you have a working network, with a bridge built on top of the NIC, using the bridge for networking instead of the NIC itself. Once you have that, all you need to do it set the networking mode of the VMs to "bridged", and attach them to the bridge as well. This will make the bridge also operate as a virtual hub for the VMs –  dyasny Feb 14 '11 at 10:32
    
I did understand what you said and to my surprise the vm's are working now. –  nicepuli Feb 15 '11 at 14:54
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.