Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I work on 2003 server, and I have a DHCP with 1 scope 10.2.1.0/8

I would like to create a second scope 10.2.2.0/8 for attribute this scope for WiFi clients and the first scope for LAN clients (RJ45)

How can I do this ?

Thanks

share|improve this question
add comment

2 Answers

up vote 1 down vote accepted

When you create your scopes, just ensure that your WIFI scope is only associated with your WIFI adapter, and your LAN scope is connected only to your LAN adapter.

Your netmasks are incorrect - judging by your network IDs I would guess you want /24 not /8.

share|improve this answer
add comment

You'll need a router if you want to have two separate subnets (or an extra interface on you'r existing router/firewall). You'll also need to enable DHCP relay on that new interface and point it to your existing DHCP server.

BTW: Your subnet masks are way off, unless your are using inverted masks? Are the subnet 255.255.255.0 (/24)?

share|improve this answer
    
thanks for you answer. I will change my subnet mask –  Nicolas Jun 11 '09 at 8:36
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.