Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

After the install there is only a Loopback-Pseudo-Interface shown when I execute

netsh interface ipv4 show interfaces

Do I have to enable the real adapter explicitly or does the server has no appropriate driver for the network adapter?

share|improve this question
2  
You should update your question to detail the server make and model, or at least the network card model. –  jscott Feb 24 '11 at 12:05
add comment

closed as not a real question by Jim B, Jenny D, mdpc, voretaq7 May 10 '13 at 19:56

It's difficult to tell what is being asked here. This question is ambiguous, vague, incomplete, overly broad, or rhetorical and cannot be reasonably answered in its current form. For help clarifying this question so that it can be reopened, visit the help center.If this question can be reworded to fit the rules in the help center, please edit the question.

2 Answers

Try "netsh interface set interface name="Local Area Connection" admin=ENABLED" just to see if can ressurect the adapter. If not, it would seem they are not appropriated from the bios.

share|improve this answer
add comment

As jscott said, you really need to provide more info (make/model) of the system and the NIC. That being said, if this is server class hardware and you just ran the install directly off a Microsoft retail/Volume license media, it's a pretty good bet that you need to get the driver for the NIC. If you have drivers you can install them in core using the pnputil.exe

pnputil -i -a <path to .inf file>

edit: wow - just realized this question was from 2011 but only edited again today. Somehow, I doubt this user is coming back to mark this as answered..

share|improve this answer
add comment

Not the answer you're looking for? Browse other questions tagged or ask your own question.