Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I received a new VM from IT dept. It has Windows 2008 and VMWare tools installed. I have installed my .NET 4 windows service on the machine which does lots of HttpWebRequests. I was looking at DebugView, and I see the following log. Once that kind of log shows up on the screen, my app stops working. It's still in memory without any exceptions logged ( I have enough logging in place). But, it's kind of doing nothing as far as I can see.

Log Details:

> [FFFFFA800471C010] WskProIRPGetAddrInfo is called.
[bind=FFFFFA8003829C10] Binding reference count++ = 2 (status = 00000000, impersonation= 2).
[FFFFFA80046B3170] Request reference count++ = 3.
[FFFFFA80046B3170] RPC method type = 1: rpc-method succeeded, queue to rpc-pending-list.
[FFFFFA80046B3170] Request reference count-- = 2.
[FFFFFA80046B3170] WskKnrRpcComplete: rpc calls back for completion.
[FFFFFA80046B3170] WskKnrCompletePending: complete pending request (rpc=1).
[FFFFFA80046B3170] Request reference count-- = 1.
[FFFFFA80046B3170] Request reference count-- = 0.
[FFFFFA80046B3170] WskKnrCompleteRequest: rpc completion return status = 00000000 (reply=00000000).
[FFFFFA80046B3170] WskProAPIGetAddressInfo returned addrinfo: [addr=FFFFF8A00C199A50].
[bind=FFFFFA8003829C10] Binding reference count-- = 1.
[FFFFFA80046B3170] WskKnrCompleteRequest: complete irp with IO status = 00000000.
[addr=FFFFF8A00C199A50] WskProAPIFreeAddressInfo freed addrinfo.
[FFFFFA80049EA680] WskProIRPGetAddrInfo is called.
[bind=FFFFFA8003829C10] Binding reference count++ = 2 (status = 00000000, impersonation= 2).
[FFFFFA8004564C00] Request reference count++ = 3.
[FFFFFA8004564C00] WskKnrRpcComplete: rpc calls back for completion.
[FFFFFA8004564C00] WskKnrCompletePending: complete pending request (rpc=1).
[FFFFFA8004564C00] Request reference count-- = 2.
[FFFFFA8004564C00] Request reference count-- = 1.
[FFFFFA8004564C00] RPC method type = 1: rpc-method succeeded, queue to rpc-pending-list.
[FFFFFA8004564C00] Request reference count-- = 0.
[FFFFFA8004564C00] WskKnrCompleteRequest: rpc completion return status = 00000000 (reply=00000000).
[FFFFFA8004564C00] WskProAPIGetAddressInfo returned addrinfo: [addr=FFFFF8A00731B680].
[bind=FFFFFA8003829C10] Binding reference count-- = 1.
[FFFFFA8004564C00] WskKnrCompleteRequest: complete irp with IO status = 00000000.
[FFFFFA80049732E0] WskProIRPGetAddrInfo is called.
[bind=FFFFFA8003829C10] Binding reference count++ = 2 (status = 00000000, impersonation= 2).
[FFFFFA8003D53670] Request reference count++ = 3.
[FFFFFA8003D53670] RPC method type = 1: rpc-method succeeded, queue to rpc-pending-list.
[FFFFFA8003D53670] Request reference count-- = 2.
[FFFFFA8003D53670] WskKnrRpcComplete: rpc calls back for completion.
[FFFFFA8003D53670] WskKnrCompletePending: complete pending request (rpc=1).
[FFFFFA8003D53670] Request reference count-- = 1.
[FFFFFA8003D53670] Request reference count-- = 0.
[FFFFFA8003D53670] WskKnrCompleteRequest: rpc completion return status = 00000000 (reply=00000000).
[FFFFFA8003D53670] WskProAPIGetAddressInfo returned addrinfo: [addr=FFFFF8A00D32D600].
[bind=FFFFFA8003829C10] Binding reference count-- = 1.
[FFFFFA8003D53670] WskKnrCompleteRequest: complete irp with IO status = 00000000.
[addr=FFFFF8A00731B680] WskProAPIFreeAddressInfo freed addrinfo.
[addr=FFFFF8A00D32D600] WskProAPIFreeAddressInfo freed addrinfo.
KTM:  TmCommitTransaction for tx 4aba720
KTM:  Notifying RM of 1 for tx 4aba720
KTM:  TmPrepareTransaction for en 475cbc0
KTM:  Notifying RM of 16 for tx 4a07060
KTM:  Notifying RM of 2 for tx 4aba720
KTM:  TmPrepareTransaction for en 475cbc0
KTM:  Notifying RM of 2 for tx 4a07060
KTM:  Notifying RM of 32 for tx 4a07060
KTM:  TmRollbackEnlistment for tx 4a07060
KTM:  Notifying RM of 2 for tx 4aba720
KTM:  Notifying RM of 4 for tx 4aba720
KTM:  TmCommitTransaction for tx 4a07060
KTM:  Notifying RM of 64 for tx 4a07060
KTM:  TmRollbackEnlistment for tx 4a07060
KTM:  TmRollbackEnlistment for tx 4aba720
KTM:  TmRollbackTransaction for tx 4a07060
KTM:  TmRollbackEnlistment for tx 4aba720
KTM:  TmRollbackTransaction for tx 4aba720
[2344] Trace Start:0End Index:8 
[2344] Trace Start:0End Index:8 
KTM:  TmCommitTransaction for tx 4b2c610
KTM:  Notifying RM of 1 for tx 4b2c610
KTM:  TmPrepareTransaction for en 48643d0
KTM:  Notifying RM of 16 for tx 4a6e250
KTM:  Notifying RM of 2 for tx 4b2c610
KTM:  TmPrepareTransaction for en 48643d0
KTM:  Notifying RM of 2 for tx 4a6e250
KTM:  Notifying RM of 32 for tx 4a6e250
KTM:  Notifying RM of 2 for tx 4b2c610
KTM:  Notifying RM of 4 for tx 4b2c610
KTM:  TmCommitTransaction for tx 4a6e250
KTM:  Notifying RM of 4 for tx 4a6e250
KTM:  Notifying RM of 64 for tx 4a6e250
KTM:  TmRollbackEnlistment for tx 4a6e250
KTM:  TmRollbackEnlistment for tx 4b2c610
KTM:  TmRollbackTransaction for tx 4a6e250
KTM:  TmRollbackEnlistment for tx 4a6e250
KTM:  TmRollbackEnlistment for tx 4b2c610
KTM:  TmRollbackTransaction for tx 4b2c610
[FFFFFA800477E5D0] WskProIRPGetAddrInfo is called.
[bind=FFFFFA8003829C10] Binding reference count++ = 2 (status = 00000000, impersonation= 2).
[FFFFFA8003C95510] Request reference count++ = 3.
[FFFFFA8003C95510] RPC method type = 1: rpc-method succeeded, queue to rpc-pending-list.
[FFFFFA8003C95510] Request reference count-- = 2.
[FFFFFA8003C95510] WskKnrRpcComplete: rpc calls back for completion.
[FFFFFA8003C95510] WskKnrCompletePending: complete pending request (rpc=1).
[FFFFFA8003C95510] Request reference count-- = 1.
[FFFFFA8003C95510] Request reference count-- = 0.
[FFFFFA8003C95510] WskKnrCompleteRequest: rpc completion return status = 00000000 (reply=00000000).
[FFFFFA8003C95510] WskProAPIGetAddressInfo returned addrinfo: [addr=FFFFF8A00D297510].
[bind=FFFFFA8003829C10] Binding reference count-- = 1.
[FFFFFA8003C95510] WskKnrCompleteRequest: complete irp with IO status = 00000000.
[addr=FFFFF8A00D297510] WskProAPIFreeAddressInfo freed addrinfo.
share|improve this question
add comment

1 Answer 1

Sounds more like a question for StackOverflow. Anyway, you can use the Visual Studio integration for VMware debugging. Check out in particular: http://www.replaydebugging.com/ ...

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.