up vote 0 down vote favorite
share [g+] share [fb]

I have a two Site Network Lan, I mean Site A and Site B On site A, I have configured a cisco ASA 5520 and before that I had a cisco 2800 router. This configuration has been done by a hired company.

Recently I took a SNAF (Securing Networks with ASA - Foundation) course but still have some little problem as I need to get use to it.

My challenge now is to configure the same equipment, so that both sites can comunicate via the ASA.

How should my configuration look like at Site B? For example: Routing, NAT, or PAT etc...

Can someone give a sample configutation please? I really need to do it, as my company are expecting a lot from me because they paid the course I did for SNAF.

link|improve this question
I've edited your post to make the English readable. We do still need more information about the network configuration at both sites A and B, number of PCs, IP connectivity etc. I suspect you're in over your head, SNAF course or not. – Tom O'Connor Mar 2 '11 at 10:34
Dear TOM...Thanx alot for your help, in fact my english is quiet poor. – Big Denzel Mar 2 '11 at 18:41
Dear TOM...Thanx alot for your help, in fact my english is quiet poor. as for my network, i got about 150 PCs on SITE A and about 100 PCs on SITE B. – Big Denzel Mar 2 '11 at 18:43
Yes TOM. just to tell you know that my network ip address is 10.1.4.x on both Site. as i said, my challenge now is to configure both ASA and Router on SITE B.. well i can do things like making the interfaces up suchs as inside, dmz and outside interface, but still need some help on Routing, Nat, Pat etc etc... how can i do or configure it so that both ASA and Routers can communicate each other? – Big Denzel Mar 3 '11 at 11:25
feedback

Know someone who can answer? Share a link to this question via email, Google+, Twitter, or Facebook.

Your Answer

 
or
required, but never shown
discard

Browse other questions tagged or ask your own question.