Sign up ×
Server Fault is a question and answer site for system and network administrators. It's 100% free, no registration required.

Any unix:

I have the following cmd line which works fine.

rsync -avr -e ssh /home/dir

But I need to set it up now to rsync to a remote server that only has an FTP server on it. How do I go about that?

I looked at the rsync help but quickly got lost (I don't do this stuff very often).

share|improve this question
This is akin to asking how to use HTTP over IRC, or how to use FTP over SMTP... – Juliano Nov 11 '09 at 12:26
Maybe you could explain some of your reasoning for wanting to do this, then we can help you come up with a viable solution. – James Jul 5 '11 at 21:06
essentially i was trying to automate a backup from a shared hosting server, and didn't understand how rsync worked. i have moved to a vps now, and don't have the limitation of ftp anymore – bumperbox Jul 5 '11 at 21:58
Duplicity is your god:… – Userpassword Feb 27 at 15:02

15 Answers 15

up vote 53 down vote accepted

You don't. rsync can't do that for you, it is a protocol of its own and doesn't work over FTP.

You might, however, want to try csync. IIRC it provides rsync-like behaviour over HTTP. I can't comment on whether it works over FTP, you'll have to try it.

share|improve this answer
Looking at the csync web page, it supports sftp but there's no mention of support for plain ftp. – Keith Thompson Jul 11 '14 at 2:06

Rsync definitely isn't going to work for you for the reasons others have mentioned.

However, lftp and ncftp both have "mirror" modes that will probably meet your needs.

I use this to push stuff from my local directory to a ftp or sftp web host:

lftp -c "set ftp:list-options -a;
lcd ./web;
cd /web/public_html;
mirror --reverse --delete --use-cache --verbose --allow-chown  
--allow-suid --no-umask --parallel=2 --exclude-glob .svn"
share|improve this answer
lftp is very nice. another one i just found out about is wput which has built-in bandwidth limiting. – karmakaze Jul 17 '13 at 6:46

As written by esel

lftp is very good tool.

I suggest you to parametrize the script, and make use of the


options, that excludes filenames using the glob feature (*,? ..) of your shell:

lftp -c "set ftp:list-options -a;
open '$FTPURL';
lcd $LCD;
cd $RCD;
mirror --reverse \
       $DELETE \
       --verbose \
       --exclude-glob a-dir-to-exclude/ \
       --exclude-glob a-file-to-exclude \
       --exclude-glob a-file-group-to-exclude* \
       --exclude-glob other-files-to-exclude"

Warning: make sure that the target directory exists, otherwise the cd command will fail, so operation including deleting trees of files will take place at wrong directory (root)!

I have updated script so that --delete option is disabled by defaut, enable it by uncommenting the DELETE= command.

share|improve this answer
Helped me a great bunch. But I had to remove the "set ftp:list-options -a;" which where messing stuff up. – mat Nov 16 '10 at 20:33
Brilliant response GabrieleV - That script is brilliantly constructed! Thanks – robburgoyne Jan 18 '11 at 1:52
Is there something like this that does the same thing over SFTP (FTPS?)? – trusktr Mar 14 '12 at 2:52
I would do this before cd $RCD, so as to prevent a-script-with-a-typo from accidentally deleting files from the wrong directory: set cmd:fail-exit yes. (It seems lftp doesn't notice that it has actually exited, until you issue the next command.) — And before cd $LCD I'd do this (in the local shell, that is, at the top of the scrip): set -eu. – KajMagnus Jun 28 '12 at 21:05
Actually, the first time I run my script, I had not yet created the remote directory, so the script failed to CD into that non-existing dir. Then the script started to mirror, and thus --delete:d files from the wrong dir. (But I copied them back again, so in that case it didn't matter. Perhaps it matters for someone else.) – KajMagnus Jun 28 '12 at 22:09

Depending of what you're actually trying to do, another completely different approach could be use curlftps to mount a ftp folder, and then maybe rsync the two "local" folders.

The installation is different depending on your distro so I can't generalize on that, but you need to installfuse and curlftpfs (prolly Debian already has fuse install by default), then:

  1. sudo apt-get install curlftpfs

  2. Make sure the fuse module is loaded (modprobe fuse)

  3. sudo curlftpfs /path/to/ftp/folder/ -o user=username:password,allow_other

Note that there's no space after the last comma (it's not a typo!). If you're satisfied with that or don't want to make that every time, you can add it to your fstab (usually in /etc/fstab): /path/to/ftp/folder/ fuse auto,user,uid=1000,allow_other 0 0

In that case, you have to make sure the fuse module is loaded before.

Be advised though, of two things:

  • That the developer dropped the project one or two years ago, so I don't know how usable/stable for the time being.
  • If the password contains a weird character curlftpfs could fail (maybe you can do something with the .netrc).
share|improve this answer
FTP Fuse and rsync is closest to the question but clearly insane on anything but a small set of small files. – Steve-o Sep 23 '11 at 21:03
Why would it be insane? By default rsync stat()s, it doesn't compare the contents. That can be done by ls -l with an ftp client. – ptman Dec 30 '11 at 11:21
I actually tried this (via rsnapshot) and it didn't work, each file returned and error, showing that rsync couldn't create a link. So using lftp in conjunction with rsnapshot did the trick – Konstantin Pereyaslov Feb 11 '13 at 4:25
Flawless on 14.04 LTS; an additional tip: when you're ready to unmount your FTP site simply use umount DIR where DIR was your /path/to/ftp/folder above. – Joe Aug 4 at 15:42

There is weex...

Weex is an utility designed to automate the task of remotely maintaining a web page or other FTP archive. It will synchronize a set of local files to a remote server by performing uploads and remote deletes as required.

share|improve this answer
Works like charm! You running it like this: $ weex yourFTPconfigName Here is manual – sobi3ch Jan 30 at 14:48

rsync does not work over ftp. On the remote side it needs either the rsync daemon or a shell that it can call rsync from. Ftp generally allows you to call a few commands and rsync is not one of them. There are other tools meant for automating ftp tasks like "lftp".

share|improve this answer

This seems like a good and free fit:

share|improve this answer
Thanks for sharing! That worked perfectly :) – Cha0s Apr 27 at 16:37

I am using GVFS/FTP. I mount my remote FTP servers with gigolo. As they are seen as local directories almost anything working on local files works. rsync is designed to compute file hashes remotely to compare files without transferring them, but doing that with virtual files transfers the files anyway. unison and freefilesync normally work well but I met a problem when they want to rename a file thy uploaded, no problem downloading. This could be a problem with gvfs 1.6.1.

share|improve this answer

For what it appears you are trying to do, you could also use wget.

wget -m

share|improve this answer
That will only make a mirror of the site. You can't use this to upload your modifications. – David V. Feb 2 '11 at 10:06

Jonas S's solution can be useful depending on the circumstance, for example if you have a high download speed and slow upload, checking the files on the server might be relatively faster than uploading files unnecessarily.

You probably want to use CurlFTPFS, though:

Although, generally, it is better to use a regular FTP client altogether instead of rsync.

share|improve this answer

You can use curlftpfs to mount ftp and use rsync after

share|improve this answer
Welcome to ServerFault! This may be a good start, but some more technical detail as to why this is a better approach, and possibly a mock up on how to do it, might be reasonable. – Scott Pack Dec 9 '12 at 22:11

I don't believe you will be able to do this, the server you are trying to Rsync to will only have an FTP server running, it will not understand the commands that Rsync is sending it.

If the reason you want to do this is that you only have access to port 21, but you have control of the server, you can change the port Rsync listens on, on the server, but this is obviously only useful if you don't want to use FTP on that port.

share|improve this answer

If you want to automate the task then use lftp as you can create a script as some people have posted above, you can script it all really easily to your liking, if your looking for a one time solution (i.e. you need download an entire website via ftp / move it to another server) use ncftp, its simple, install it if its not already installed:

apt-get install ncftp


yum install ncftp

(sorry non debian/red hat based distros..)

once installed, open ncftp in the terminal then type:

open -u ftpusername

It'll ask you for the password, enter it, and then:

get -R /home/remotewebsite/public_html/ /home/localwebsite/public_html/

It'll do the rest pf the work for you.. good luck

share|improve this answer

Using “sitecopy” or “mirror” can save you lots of bandwidth.

They both handle efficient incremental update.

share|improve this answer

Install sftp and then you can use rsync.

I use the following one.

rsync --delete --times --recursive --perms --owner --group --verbose --progress --stats -e ssh root@ /folder2/
share|improve this answer
That is not FTP it probably uses the sftp subsystem internal to SSH (at least that's what it does in the default config) – Server Horror Jun 12 '09 at 12:27
csync(sftp) and rsync may be the same way of working – Rajat Jun 12 '09 at 12:34

protected by Tom O'Connor Jul 20 '13 at 21:36

Thank you for your interest in this question. Because it has attracted low-quality answers, posting an answer now requires 10 reputation on this site.

Would you like to answer one of these unanswered questions instead?

Not the answer you're looking for? Browse other questions tagged or ask your own question.