Server Fault is a question and answer site for system and network administrators. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

We have several Novell Netware file sharing that we are inheriting. This is temporary and we are transitioning to our Samba based file sharing.

For the time being, I need to be able to login to Novell for administration tasks. However, when I installed the Novell client on a VirtualBox instance, I was not able to find the Trees.

I do not know much about Novell. How do I get this working on a VirtualBox instance? It's running on a Windows XP guest with an Windows 7x64 host.

share|improve this question
As long as the Virtualbox guest can interact with the network, it should be good to go. Can you ping other servers in the network, query DNS, etc? – Hyppy Mar 21 '11 at 20:15
You administer Netware from a virtual machine exactly the same way you would from a physical machine. As far as your Netware server is concerned it's the same as any other computer on the network... – voretaq7 Mar 21 '11 at 20:20
voretaq7: When I click "trees" button under eDirectory, I do not see any trees. – Belmin Fernandez Mar 21 '11 at 20:44
What version of Netware? For version 5 and above you can use pure IP (no IPX), and SLP may or may not be required depending on your DNS setup. – Johnnie Odom Jun 15 '11 at 13:09

As SpacemanSpiff noted, SLP is used to find servers and trees.

However, if you cannot get multicast out the network connection, I would consider just entering the IP address/IP Name of the server or tree to try and connect. That will work even if SLP is not working, most of the time.

share|improve this answer

Novell trees and resources are typically located via SLP, one or more of the netware servers is an SLP DA, and you should configure the novell client to point at the server that is the DA.

From there, as for administration, you should either configure RCONJ or use Novell remote manager to manage the box. This should be sufficient with minimum configuration necessary.

share|improve this answer

I've always used Netware with IPX/SPX for main protocol and only used IP for some of the specific apps that required it. You may need to install your client with IPX and then try searching for the tree.

share|improve this answer


You can also use this free utility to connect to the NetWare server remotely:

share|improve this answer

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.