Take the 2-minute tour ×
Server Fault is a question and answer site for system and network administrators. It's 100% free, no registration required.

I have a Cisco 2811 with 256MB DRAM. I know this because show version tells me so. I want to upgrade it to 768MB. I know that this takes 1 - 512MB amd 1 - 256MB DIMM. I know that the 2811 has 2 memory slots.

What I do not know is whether the 256 MB I have is 2 - 128MB DIMMs or 1 - 256MB DIMM.

Is there an IOS command for me to find this out, and if so what is it? I am not near the router right now, so simply powering it off and removing the lid is a non-starter, however easy it would be, and let us just say that the less access the on-site staff have to the inside of my routers, the happier I'll be. Am I doomed to drive over after hours, or else buy an additional ridiculously expensive DIMM I may not need?

share|improve this question

2 Answers 2

up vote 5 down vote accepted

show platform gives what you want. And it's included in a show tech.

sample output (interesting part only):

r01#sh platform 
3725 Network IO Interrupt Throttling:
throttle count=0, timer count=0
active=0, configured=0
netint usec=4000, netint mask usec=1000
IO Mask is 3
3725,  r4k_cpu_level: 0
r4k_cpu_level: 0
Intr Mask is 9703

<snip>

Dimm 0 SPD data :
Size of dimm                 = 128 Megabytes
<snip>

Dimm 1 SPD data :
Memory Slot Empty
share|improve this answer
    
Perfect. Thank you so much. I knew there had to be a way. –  atroon Apr 6 '11 at 0:27

It's late here so I can't check, could be wrong but won't show tech-support do that?

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.