Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

We have a Dell PowerVault NX-3000 server running Windows Server 2008. Every now and then, when I try to login, the server seems to hang at the Welcome screen after I type in the password. However, all other services on the server are running fine - users are able to print off the print server and access their files. It just won't let me login. Any idea why this is happening?

P.S.: I can't look at the server logs, because it won't let me login in the first place. Remote administration is also disabled on the server, so I can't use Remote Administration tools to look at the logs.

share|improve this question
    
I'm assuming that you don't have access to change so you can administer remote administration and view the logs. Do you have access to the console to login with that and view the logs. If you can't get logged in at all and you can't view any logs, there's not much you can do. –  Nixphoe Apr 13 '11 at 2:39
    
I ended up hard-rebooting the server. Now I've enabled remote event log administration and remote server management so that I can investigate this issue when it happens the next time. –  ErJab Apr 13 '11 at 7:43
add comment

1 Answer 1

Try enabling RDP remotely and reboot the server after hours using the following command:

shutdown /m:\\server /r /t 15

share|improve this answer
    
RDP was already enabled. (Remote administration is not enabled.) The same problem occurs then too. The screen hangs at the welcome screen. –  ErJab Apr 12 '11 at 21:39
    
Is that a domain-connected server? –  Vick Vega Apr 12 '11 at 23:11
    
Yes it is a domain-connected server. –  ErJab Apr 13 '11 at 7:41
    
What defined as DNS on the card? –  Vick Vega Apr 13 '11 at 13:56
    
Try disconnecting (physically) the server from the network before rebooting it. If it works, check the network configuration and the remove the server from the domain and add it again. –  Stephane Jun 23 '11 at 6:11
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.