Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

After attaching a ISCSI target to ESXi 4.1 U1, we saw that ESXi created a 740,25 GB partition onto the LUN, even though the device has 2,7 TB capacity. Why did ESXi not create a bigger vmfs partition? How to fix it?

share|improve this question
    
We tried deleting the partition from storage server with cfdisk and letting ESXi recreate the partition using a different blocksize but this resulted the partition size to still be 740 GB. –  Henno Apr 27 '11 at 13:22
    
Updated the question with new information about ESX LUN limits. –  Henno Apr 27 '11 at 13:52
    
Relocated the information from question to answer part. –  Henno Apr 27 '11 at 13:57

2 Answers 2

up vote 4 down vote accepted

The "Why?" part:

According to http://www.delltechcenter.com/page/3TB+drives%3A+OS+Behavior+Matrix, the maximum LUN size for VMFS is 2TB.

According to http://www.delltechcenter.com/page/3TB+drives%3A+OS+Behavior+Matrix what ESX will do if the LUN size is bigger is it makes a 740GB partition and the rest is inaccessible.

The "How to fix it" part:

Present a smaller than 2TB LUN to ESX. That can be done by creating partitions on the disk (/dev/sdb1 /dev/sdb2) and exporting those partitions as separate LUNs to ESX.

share|improve this answer

Max size LUN in ESXi is 2TB -512 Bytes. The LUN can be no bigger. The information can be found in the VMware configurations maximums document.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.