Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I am having a problem loading my acronis image onto dissimilar hardware.

My image was created off a solid state drive, Windows 7 x64. I am trying to load it onto a WD Raptor mechanical drive. The imaging process went through ok, but when i try to boot into windows I get a blue screen and reboot.

Thanks for any suggestions. dg

share|improve this question
    
Is the only change the HDD? –  DanBig Apr 28 '11 at 15:43
    
I suspect the issue might be due to different storage controllers between the machines. Please confirm. –  GregC Apr 28 '11 at 15:46
    
Do you have Universal Restore add-on? This helps strip the drivers so the image can be loaded on dissimilar hardware with ease. –  xeon Apr 28 '11 at 16:28
    
no, i don't have this add-on, but i am looking into getting it. –  dmg Apr 28 '11 at 16:44
    
the target machine is exactly the same, and the storage controller is identical but the SSD from which the image was made was using the "RAID ON" SATA operation mode in the BIOS, while the HDD in the target machine was using the "RAID Autodetect/ATA" SATA operation mode. –  dmg Apr 28 '11 at 16:53

1 Answer 1

The problem went away after I switched the target machine to "RAID ON" SATA operation mode in the BIOS and re-imaged the HDD.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.