Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I've got problem with configuration 6to4 on virtual machines. I've got two machines with ubuntu.

Conf. of first machine:

#ip tunnel del tun6to4                     
#ip tunnel add tun6to4 mode sit ttl 64 remote any local 150.254.34.1
#ip link set dev tun6to4 up
#ip -6 addr add 2002:a02d:1701::1/16 dev tun6to4

Conf. of second machine:

# ip tunnel del tun6to4                   
#ip tunnel add tun6to4 mode sit ttl 64 remote any local 160.45.23.1
#ip link set dev tun6to4 up
#ip -6 addr add 2002:96fe:2201:1/16 dev tun6to4

I try ping machines: ping 160.45.23.1 on first machine and ping 150.254.34.1 on second and thera is no connection between.

What is the reason?

share|improve this question
    
If you can't ping IPv4 addresses, you have an IPv4 problem. Check addresses, masks, gateway and firewall. –  Turbo J May 4 '11 at 20:09

1 Answer 1

This is my address:

first machine:

ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN 
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host 
   valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 08:00:27:86:4b:84 brd ff:ff:ff:ff:ff:ff
inet 192.168.100.22/24 brd 192.168.100.255 scope global eth0
inet6 fe80::a00:27ff:fe86:4b84/64 scope link 
   valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 08:00:27:00:3f:ba brd ff:ff:ff:ff:ff:ff
inet 192.168.100.20/24 brd 192.168.100.255 scope global eth1
inet6 fe80::a00:27ff:fe00:3fba/64 scope link 
   valid_lft forever preferred_lft forever
4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 08:00:27:c0:93:ab brd ff:ff:ff:ff:ff:ff
inet6 fe80::a00:27ff:fec0:93ab/64 scope link 
   valid_lft forever preferred_lft forever
5: sit0: <NOARP> mtu 1480 qdisc noop state DOWN 
link/sit 0.0.0.0 brd 0.0.0.0
7: tun6to4: <NOARP,UP,LOWER_UP> mtu 1480 qdisc noqueue state UNKNOWN 
link/sit 150.254.34.1 brd 0.0.0.0
inet6 2002:a02d:1701::1/16 scope global 
   valid_lft forever preferred_lft forever
inet6 ::150.254.34.1/128 scope global 
   valid_lft forever preferred_lft forever

second machine:

 ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN 
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host 
   valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 08:00:27:bf:3f:29 brd ff:ff:ff:ff:ff:ff
inet 192.168.100.26/24 brd 192.168.100.255 scope global eth0
inet6 fe80::a00:27ff:febf:3f29/64 scope link 
   valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 08:00:27:75:71:01 brd ff:ff:ff:ff:ff:ff
inet 192.168.100.27/24 brd 192.168.100.255 scope global eth1
inet6 fe80::a00:27ff:fe75:7101/64 scope link 
   valid_lft forever preferred_lft forever
4: sit0: <NOARP> mtu 1480 qdisc noop state DOWN 
link/sit 0.0.0.0 brd 0.0.0.0
5: tun6to4: <NOARP,UP,LOWER_UP> mtu 1480 qdisc noqueue state UNKNOWN 
link/sit 160.45.23.1 brd 0.0.0.0
inet6 2002:96fe:2201::1/16 scope global 
   valid_lft forever preferred_lft forever
inet6 ::160.45.23.1/128 scope global 
   valid_lft forever preferred_lft forever
share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.