Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

When I run a read-only fsck on the mounted root partition of a CentOS 5 server, it finds a number of errors. However, running a forced check upon next boot does not find any!

Here are the results of the mounted read-only check:

# fsck -nCf /
fsck 1.39 (29-May-2006)
e2fsck 1.39 (29-May-2006)
Warning!  /dev/sda3 is mounted.
Warning: skipping journal recovery because doing a read-only filesystem check.
Pass 1: Checking inodes, blocks, and sizes
Deleted inode 232259589 has zero dtime.  Fix? no

Inodes that were part of a corrupted orphan linked list found.  Fix? no

Inode 232259593 was part of the orphaned inode list.  IGNORED.
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
Block bitmap differences:  -32194676 -(32235995--32235998) -(32236209--32236210) -(32238978--32238981) -(32239590--32239593) -(32239924--32239926) -(32241448--32241457) -(32245306--32245313) -32867401 -(36754088--36754097) +(143647672--143648620) -(143653816--143654764)
Fix? no

Free blocks count wrong for group #982 (1277, counted=1276).
Fix? no

Free blocks count wrong for group #983 (810, counted=777).
Fix? no

Free blocks count wrong for group #984 (19647, counted=19637).
Fix? no

Free blocks count wrong for group #1003 (28042, counted=28041).
Fix? no

Free blocks count wrong for group #1121 (11611, counted=11598).
Fix? no

Free blocks count wrong (227428348, counted=227427933).
Fix? no

Inode bitmap differences:  -232259589 -232259593
Fix? no

Free inodes count wrong (243391778, counted=243391739).
Fix? no


/: ********** WARNING: Filesystem still has errors **********

/: 205534/243597312 files (3.7% non-contiguous), 16161230/243589578 blocks

The way I run a forced check is by:

touch /forcefsck
echo -n "-y" > /fsckoptions

This does force fsck to run upon next boot and the "-y" option should autofix all errors, but the check doesn't find any during bootup. However, once the file system is mounted and I run the read-only check again, it finds all the same errors.

Thanks for your time,

PRL

share|improve this question

1 Answer 1

up vote 1 down vote accepted

A mounted filesystem will be inconsistent on the disk. Don't check a mounted filesystem. Straight from the horses mouth: "However, even if it is safe to do so, the results printed by e2fsck are not valid if the filesystem is mounted." -E2FSCK(8)

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.