Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I have 18 Linksys SRW224G4 switches. As far as I know, they can be managed only one by one via web-interface that works only in IE. Is there any way to automate this process? More specifically, now I need to enable portfast on all 100Mbit interfaces and apply one ACL to those ports. Can I do this in some automated way? Doing it manually on all 18 switches will be the worst nightmare I ever imagined.

share|improve this question

2 Answers 2

You can use a TFTP server and the "File Management" functionality to configure one switch, modify the file, then load it onto other switches. Look on the "Maintenance" tab of the web interface. You'll have to edit the configuration for each switch, but at least you can do that with a script.

share|improve this answer
    
Hmm... I've found only 'Admin -> Save configuration' and resulting file looks like something binary. Also this line appeared in log: %COPY-I-FILECPY: Files Copy - source URL flash://startup-config.ber destination URL tftp://10.216.0.2/test.cfg –  gelraen May 10 '11 at 16:01
    
looks like t can be managed via SNMP, but without specific MIB or some GUI/CLI tool it's almost impossible –  gelraen May 10 '11 at 16:17
up vote 0 down vote accepted

Turns out that these switches actually have CLI (link). So all i need is to login via telnet and paste few commands.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.