Take the 2-minute tour ×
Server Fault is a question and answer site for system and network administrators. It's 100% free, no registration required.

Environment:
WS 2008 R2 Terminalserver (we have 3 of them).
Client VPNs into Company Network and establishes a RDP-connection to one of the TS (load balancing).
Printer is a HP LaserJet 1200 and it's plugged in via USB at the client-machine (Win 7 32bit).
We installed the PCL 5 driver at the client. On the server, RDP Easy Print is used.
The printer has already been reinstalled.

When the client tries to print a list out of an application for value-added-taxes, it spools the printjob at the server. The printjob vanishes really quick at the server-print-queue. At the client, the print-job loads very slowly. It loads 1.44 MB out of about 12 MB and rests. After a (long) while, the job loaded 3 MB and prints the first page (out of about 10). After that, the job fails at the client.

Printing locally and out of other applications on the terminalserver works perfectly. But I can't say if there are other problems on the terminalserver with large documents because the above mentioned application is the only one that produces such big documents (anything other has maximal 2 sites).

I don't have any idea to solve this. I hope anyone can give me a few tips to solve this problem or find the problem.

Edit: If nobody has an idea, it would eventually help to know what you're doing to troubleshoot printing (over rdp). I'm open to any proposal.

share|improve this question

1 Answer 1

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.