Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

Is it possible to replace a 5/i controller without losing the data on the array? Can I import this as a foreign configuration? Any "gotchas" or tips to make this smoother?

share|improve this question
    
Also take a look at this other post going if you are still working on this serverfault.com/questions/273403/… –  Chadddada Jun 20 '11 at 14:43

2 Answers 2

up vote 2 down vote accepted

I can't give you any 100%, because it may be different for any number of reasons, but I have done this before and got my drives back. I just imported the foreign configuration and walla my RAID was back (RAID 1 - 2 disks). However, if the system is still under maintenance I would just try and have Dell walk you through it.

share|improve this answer

RAID information should be stored on the disks themselves, and not on the actual controller (that's why if you move disks around, the server can see that they have been moved). So you should be able to replace the controller with no issue whatsoever (but a backup is always a good thing in case something goes wrong). As mentioned above, having dell on the hook is in your best interest should something go wonky... processes dealing with storage can always be kind of hair raising.

share|improve this answer
    
Yes, the raid config is stored on the disks and the controller precisely for situations such as this. You'll be fine replacing it. I also recommend having DELL walk you through it if it's still under warranty. The more help the better. –  Tatas Aug 28 '11 at 6:24

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.