Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

Is there a common way to obtain information about neighboring devices from a cisco switch, provided that we're using SNMP, and CDP is completely off?

I may be on a totally wrong track here, so I could probably rephrase — on a larger scale, what's the proper way(tm) to automate the topology discovery and monitoring for a cisco-based L2 network?

Thanks in advance!

share|improve this question
add comment

1 Answer

Turning off CDP is generally meant to stop topology discovery. If you're running SNMP and know the credentials, a sweep of known subnets on the network can provide you a list of switches/routers.

Beyond that, you're going to have to get your hands really dirty by recording MAC addresses and trying to figure out the topology from the forwarding tables. Spanning tree might also provide clues here.

share|improve this answer
    
thanks for your reply! CDP is turned off for "security reasons" by the network operator (I'm merely a contractor for monitoring system), but they're using some UDLD. I'm not familiar with the latter really, and it doesn't seem to have any "get" oids, hence my question. –  etranger May 19 '11 at 12:56
    
@etranger in that case, show udld <interface> would work too, though I'm relatively certain that there aren't any OIDs for it. Looks like this one will have to be manual, if you can't convince them to enable CDP for just a few minutes :-/ –  Hyppy May 19 '11 at 12:58
    
that's weird, the protocol is there, but there's no related snmp data, do you have any thoughts as to why? CDP is currently not an option, because the policy requires it to be off, and the monitoring has to be quite regular (we'll be polling the devices at least once a day). –  etranger May 19 '11 at 13:02
    
@etranger No idea. There may be another way around this, but I don't know what it is. –  Hyppy May 19 '11 at 13:37
    
thanks anyway! –  etranger May 19 '11 at 14:25
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.