Take the 2-minute tour ×
Server Fault is a question and answer site for system and network administrators. It's 100% free, no registration required.

I know there are tons of posts about multiple SSL on same IP, but I promise I'm not beating a dead horse. My question is very clear. First, a little background...

Our organization has several ecommerce sites. All of these sites are running on the same IP, using SNI for name based virtual hosts. In most cases, this is working great. However, in some browsers (ie7 / ie8, but only on select machines for some reason), we got reports that users were seeing a domain mismatch with the SSL certificate. It turned out that they were seeing the SSL certificate for the first SSL host in alphabetic order, since Apache resolves the IP address first, THEN grabs what it thinks is the right virtual host file.

I did some experimenting with the SSL protocol and found that if I set it thusly (ssl.conf):

SSLProtocol TLSv1

Then I'd simply get a not found for any of the https domains in IE.

If I set SSLStrictSNIVHostCheck on in ports.conf

SSLStrictSNIVHostCheck on

Then I'd get a permission denied in the problematic browsers.

The problem is obviously that IE is not supporting, or not using, the TLSv1 protocol, or SNI, both of which are needed. So my question is...

Is there a configuration change I can make to support IE, perhaps under a different protocol, or is my only option using a separate IP for each virtual host which requires SSL?

Thanks in advance = )

share|improve this question
    
I don't think there's anything you can do to make a user's browser use TLS 1.0. You could change your default domain to have a statement that the visitor enable TLS 1.0 on their browser. –  Chris Ting May 25 '11 at 18:17
    
That's definitely not an option. It needs to work, regardless of client settings. –  Calvin Froedge May 25 '11 at 18:29

3 Answers 3

up vote 4 down vote accepted

SNI support is still, unfortunately, rather lacking. You don't specify, but I'd wager that your problematic IE browsers are on Windows XP machines, yes? There is no SNI support in any version of IE on Windows XP (or earlier); only Vista and later support it, and only in IE 7 and later.

See here for a list of browsers supporting SNI.

My advice: If you need to support clients that lack SNI support (and with the number of XP systems still out there, you quite likely do need to), then you'll have to implement solutions that do not depend on SNI.

share|improve this answer
    
One machine that has reported a problem is running Windows 7 + IE8. However, I have verified the aforementioned problems on this machine. This is a big part of what's puzzling me. –  Calvin Froedge May 25 '11 at 18:31
    
@Calvin Hm, that is indeed puzzling. Perhaps their's a subtle error in your config and/or your certificates, or an error in IE's implementation of SNI? I don't know, honestly, I'm simply avoiding SNI entirely until such time that it is more widely supported. –  Kromey May 25 '11 at 18:35

If you want to reach a broad audience, then do not use SNI. It is not supported widely enough and you should avoid it for at least a couple of years from now.

You should have a look at UCC/SAN certificates instead. It's usually more pricey, but it's the right thing to do in this situation. Or you could have allocated an IP address for each site.

http://www.geotrust.com/ssl/ssl-certificates-san-uc/ gives a little more info on this type of certificate.

share|improve this answer
    
I can get more IPs for $2/month each. This is definitely the way to go. –  Calvin Froedge May 25 '11 at 18:58

Today about 10% of the internet users lack support for Server Name Indication. At GlobalSign we recently created a solution to support users that have no support for Server Name Indication (SNI) by using two SSL Certificates (one is for the IP address and is free). You can read more about the problem and the solution we created to safely host multiple SSL Certificates on a single IP address in a blog article that we published today.

https://www.globalsign.com/blog/saving-ipv4-resources.html

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.