Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I work on a small business network that runs on a windows server 2008 R2 domain. Right now we use a Cisco (Linksys) RV042 router to handle both VPN connections and a single Site-Site vpn. However, there has been mild-but-increasing interest in getting client VPN integrated into ADDS so that users can use their domain accounts. I also have some spare hardware around that could possibly be recommissioned into use to function as a vpn server.

The machine has only one network interface; however, the RV042 has a redundant WAN interface that can be configured as a DMZ interface instead. I'm wondering: Can I run this server connected to the DMZ so that it can perform VPN functions, while the RV042 continues to function as the router and my primary DC performs DHCP/DNS services?

Technet doesn't seem to indicate that there's much leeway concerning the dual-interface nature of VPN servers, so I'm hoping this will be a quick yes/no question.

Thanks!

share|improve this question

1 Answer 1

up vote 1 down vote accepted

Yes, if you run the Windows system in the DMZ, then you will lock it down via its built-in firewall.

You can also place the Windows system behind the NAT/firewall and just map the needed ports to enable VPN functionality from the Internet side. This option is probably a little more flexible for most configurations.

share|improve this answer
    
Ah, ok. So the VPN server role isn't dead-set on bridging a WAN and a LAN interface in its design? I'd be thrilled if this is the case; I just want to make sure it's possible before I invest too much time into it. –  bwerks May 26 '11 at 22:50
    
That is definitely correct with the second approach, where the DMZ approach may vary based on how strict you want to implement your DMZ. –  user48838 May 27 '11 at 19:35
    
Finally had a chance to implement this. Worked like a charm! Just opened ports 1723 (PPTP), 500/4500 (IPSec), and 443 (SSTP) on the firewall and forwarded them to the server running RRAS, and everything's up and running. It's pretty popular already. –  bwerks Jun 14 '11 at 21:54
    
Cool... Glad it worked out. –  user48838 Jun 14 '11 at 22:02

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.