Take the 2-minute tour ×
Server Fault is a question and answer site for system and network administrators. It's 100% free, no registration required.

We have 2 internet (Broadband) connection,

About connection 1

  • ADSL modem (Binatone) + Netgear wireless router (Netgear WGR614-v10)
  • ADSL Modem (192.168.1.0) , Wireless router (192.168.2.0)

About Connection 2

  • ADSL wireless modem router (Netgear DG8345-v5) 192.168.0.0

Need:

Want to connect both wireless router/modem for local file sharing, How can i do this ?

share|improve this question
    
What are your netmasks? –  Cocoabean May 27 '11 at 6:33
    
@Cocoabean 255.255.255.0 –  Kumar May 27 '11 at 6:40

1 Answer 1

up vote 0 down vote accepted

If both routers support RIP you should be able to just enable it and connect their LAN segments together with a crossover cable. If you don't have RIP you will have to create static routes so that traffic from 2.0/24 destined to 0.0/24 is directed to 0.0 to be routed. You would also have to add a route telling 0.0/24 to send traffic destined to 0.2/24 network to the 0.2 router. A page on your WebGUIs will probably ask for "Destination" (the network of the other router: ie. 192.168.0.0/24 on Connection 1's router), and Gateway is of course the ip of the other router (192.168.0.0 for Connection 1).

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.