Take the 2-minute tour ×
Server Fault is a question and answer site for system and network administrators. It's 100% free, no registration required.

I have a PC and a Linksys SPA3102.

I have connected them directly with an etthernet cable (pc address 192.168.0.10, linksys address 192.168.0.1). An analog phone device is connected to linksys (plugged into "Phone" socket).

I turned off PC's firewall.

In Linksys configuration I set: Preferred codec: g711a (PCMA) Register: no; Make call without reg: yes; ans call without reg: yes;

I use pjsua (http://www.pjsip.org/pjsua.htm) to make a call call with arguments

pjsua --bound-addr 192.168.0.10 --no-vad --add-codec pcma sip:192.168.0.1

The analog phone rings but when I answer it no sound is available in any direction.

Any suggestions?

share|improve this question

1 Answer 1

I figured it out. In case anybody encounters the same problem.

SPA3102 does allow calling from WAN only, so I had to plug my PC to "internet" port instead "ethernet" port.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.