I have been working on converting a config over from a PIX to a ASA 8.2 but I am running into some trouble with the site to site vpn part of it. The PIX has both a client VPN and site to site. Since some of the configs for the site to site cross over the client VPN I'm getting confused. Any help would be apperciated.
Belows are excerpts of just the related VPN commands from the PIX.
access-list Remote_splitTunnelAcl permit ip 192.168.0.0 255.255.0.0 any access-list inside_outbound_nat0_acl permit ip any 192.168.0.160 255.255.255.240 access-list inside_outbound_nat0_acl permit ip host Zenoss_OS NOC 255.255.255.0 access-list inside_outbound_nat0_acl permit ip host SilverBack NOC 255.255.255.0 access-list inside_outbound_nat0_acl permit ip host enoss_Hardware NOC 255.255.255.0 access-list outside_cryptomap_dyn_20 permit ip any 192.168.0.160 255.255.255.240 access-list outside_cryptomap_20 permit ip host Zenoss_OS NOC 255.255.255.0 access-list outside_cryptomap_20 permit ip host SilverBack NOC 255.255.255.0 access-list outside_cryptomap_20 permit ip host Zenoss_Hardware NOC 255.255.255.0 ip local pool DHCP_Pool 192.168.0.161-192.168.0.174 nat (inside) 0 access-list inside_outbound_nat0_acl sysopt connection permit-vpn crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto dynamic-map outside_dyn_map 20 match address outside_cryptomap_dyn_20 crypto dynamic-map outside_dyn_map 20 set transform-set ESP-DES-MD5 crypto map outside_map 20 ipsec-isakmp crypto map outside_map 20 match address outside_cryptomap_20 crypto map outside_map 20 set peer 205.x.29.41 crypto map outside_map 20 set transform-set ESP-DES-SHA crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map client authentication LOCAL crypto map outside_map interface outside isakmp enable outside isakmp key KEY address 205.x.29.41 netmask 255.255.255.255 no-xauth no-config-mode isakmp nat-traversal 180 isakmp policy 20 authentication pre-share isakmp policy 20 encryption des isakmp policy 20 hash md5 isakmp policy 20 group 2 isakmp policy 20 lifetime 86400 isakmp policy 40 authentication pre-share isakmp policy 40 encryption des isakmp policy 40 hash sha isakmp policy 40 group 2 isakmp policy 40 lifetime 86400 vpngroup GHA_Remote address-pool DHCP_Pool vpngroup GHA_Remote dns-server 192.168.0.11 vpngroup GHA_Remote wins-server 192.168.0.11 vpngroup GHA_Remote default-domain x.org vpngroup GHA_Remote split-tunnel Remote_splitTunnelAcl vpngroup GHA_Remote idle-time 1800 vpngroup GHA_Remote password KEY
I guess what I am really asking is if someone can convert the site-to-site version of this VPN config to ASA 8.2 so I can compare it to what I have. I need to have this so I can just drop it in place and work.
Also it doesn't seem that isakmp policy 40 is being used, correct?
The following command is the only command I can't enter directly:
crypto map outside_map 20 ipsec-isakmp
I get a ERROR: % Incomplete command I then see that I need to add dynamic "dynamic map name" I'm unsure of what dynamic map I need to tie this to.