I need help configuring the CISCO RVS4000 to laptop with CISCO OPEN VPN Client.
What I've done so far.. 1) setup a RVS4000 and Turned on a VPN user, and configured what we understood. 2) ran CISCO OPEN VPN Client Setup on the Laptop 3) A certificate was generated from the RVS4000 4) The certificate was copied to the install client directory of OPEN VPN on the laptop 5) Logging into the VPN and all works fine no errors 6) I can ping the address inside my network to the RVS4000 10.10.2.1 a) Remote access is turned off so it is getting to the internal 10.10.2.1 address. b) I can actually log into my RVS4000 from here 7) I cannot see any of my other devices or ping them //10.10.2.102 or any of the others
I have not changed any of the Firewall parameters or anything on the RVS4000. I am supposing that I can actually ping and access the RVS4000, because the VPN is working. It seems something is blocking inside devices, from access in the RVS4000 router.
The point it to allow for mapped drives when a user is outside the office. I am trying to access it from an outside network with different subnets.
Thanks.
