Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I setup pure-ftp on freebsd behind firewall. On pure-ftp setuped passsi mode ftp(rangle port 50400-50600) and firewall open port from 50400-50600 (include mode IN and out). But i try use ftp client connect but not connect. Nofinication error

status: Connecting to 210.245.88.96:21...
Status: Connection established, waiting for welcome message...
Response:   220---------- Welcome to Pure-FTPd [privsep] ----------
Response:   220-You are user number 1 of 50 allowed.
Response:   220-Local time is now 13:20. Server port: 21.
Response:   220-IPv6 connections are also welcome on this server.
Response:   220 You will be disconnected after 15 minutes of inactivity.
Command:    USER bk
Response:   331 User bk OK. Password required
Command:    PASS *****
Response:   230 OK. Current directory is /
Command:    SYST
Response:   215 UNIX Type: L8
Command:    FEAT
Response:   211-Extensions supported:
Response:    EPRT
Response:    IDLE
Response:    MDTM
Response:    SIZE
Response:    REST STREAM
Response:    MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*;
Response:    MLSD
Response:    ESTA
Response:    PASV
Response:    EPSV
Response:    SPSV
Response:    ESTP
Response:   211 End.
Status: Connected
Status: Retrieving directory listing...
Command:    PWD
Response:   257 "/" is your current location
Command:    TYPE I
Response:   200 TYPE is now 8-bit binary
Command:    PASV
Response:   227 Entering Passive Mode (210,245,88,98,138,1)
Command:    MLSD
Error:  Connection timed out
Error:  Failed to retrieve directory listing
Status: Connecting to 210.245.88.98:21...
Status: Connection established, waiting for welcome message...

Help me.

Change by ibforrmation

share|improve this question

1 Answer 1

Opening ports are probably not enough, you probably also need to forward the port range back to your FTP server as well.

share|improve this answer
    
Add information. I have ip publish not by NAT –  hai Jun 29 '11 at 8:37
1  
Then the opened port range should be bidirectional across the firewall. –  user48838 Jun 29 '11 at 9:00

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.