Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I have a HP DL 160 and I would like to know all possible information on my physical disks. I want to know how many physical disks I have. I want to know if they are in raid 1 or raid 5 etc. I want to know if I can add disk or I have a disk that I can add to the operating system and use it. I'm not sure which commands or utilities can show me these info when I do df -h I get:

df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 898G 4.5G 847G 1% / /dev/sda1 99M 24M 70M 26% /boot tmpfs 2.0G 0 2.0G 0% /dev/shm

share|improve this question

5 Answers 5

hpacucli
> controller all show config detail

That is the ultimate way to obtain disk and hardware raid information on an HP system.

share|improve this answer
    
Assuming the drivers are installed. –  ewwhite Jul 16 '11 at 13:22

Here's a couple of things you can inspect to learn about the disks installed in your system:

  • cat /proc/mdstat: this file tells you all about the RAID devices you have configured, what type they are (RAID 0, 1, 5, etc.), and what physical disk partitions they're made of.
  • ls -l /dev/disk/by-id: this directory lists all the disks your system knows about, and you can generally derive their model numbers from the filenames.
  • pvdisplay: since your example indicates you're using LVM, pvdisplay will show you many of the attributes of the physical volumes that make up the logical volume.
  • lspci will tell you about the disk controllers you have installed; they'll usually be named something like "IDE interface".

If you give some more specific information about what you're trying to accomplish, it'll be easier for people to post answers that are better related to your question.

share|improve this answer

If the RAID setup has been done in the HP BIOS then I think it's possible to at their configuration through the IPMI tools. You could have 2 x disks in a mirror setup but linux would only see 1 disk as the RAID setup is in the bios.

The tools in sg_utils might also be helpful sg_scan will show what disks are visible:

sg_scan
/dev/sg0: scsi2 channel=0 id=0 lun=0 [em]
/dev/sg1: scsi3 channel=0 id=0 lun=0 [em]

sg_inq will then show more detail about a device:

$ sudo sg_inq /dev/sg0
standard INQUIRY:
  PQual=0  Device_type=0  RMB=0  version=0x05  [SPC-3]
  [AERC=0]  [TrmTsk=0]  NormACA=0  HiSUP=0  Resp_data_format=2
  SCCS=0  ACC=0  TPGS=0  3PC=0  Protect=0  BQue=0
  EncServ=0  MultiP=0  [MChngr=0]  [ACKREQQ=0]  Addr16=0
  [RelAdr=0]  WBus16=0  Sync=0  Linked=0  [TranDis=0]  CmdQue=0
  [SPI: Clocking=0x0  QAS=0  IUS=0]
    length=96 (0x60)   Peripheral device type: disk
 Vendor identification: ATA     
 Product identification: SAMSUNG HD161GJ 
 Product revision level: 1AC0
 Unit serial number:       S1VCJ9AZ302995
share|improve this answer

You should reference the server specs and take a look at:

How to find RAID configuration/level and RPM speed having only remote access to the server?

You should provide the specific server model in the question. dmidecode -t1 will give you that.

Assuming your system is a DL160 G6, the model usually comes with 4 drive bays that accommodate 3.5" disks.
See the HP Quickspecs at: http://h18000.www1.hp.com/products/quickspecs/13247_na/13247_na.html

In some rare configurations, you can have 8 disks on a DL160 model. Do you not have physical access to the system?

share|improve this answer

Have look at https://github.com/pturmel/lsdrv

This script will show you what drives you have and what are they connected to. I should give you pretty much everything apart of hardware RAID configuration.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.