I've got a Cisco 1841 router. I've been trying to configure NAT overload on it, such that its subnet can access the internet. By the looks of things, I've configured everything right. I'm not sure, though, first time I've ever done this.
Here's my config.
Cisco1841#show config Using 1095 out of 196600 bytes ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname Cisco1841 ! boot-start-marker boot-end-marker ! enable secret 5 [redacted] enable password [redacted] ! no aaa new-model ! resource policy ! mmi polling-interval 60 no mmi auto-configure no mmi pvc mmi snmp-timeout 180 ip subnet-zero no ip cef ! ! no ip dhcp use vrf connected ! ! ip domain name [redacted] ! ! ! ! interface FastEthernet0/0 ip address 10.32.32.42 255.255.254.0 ip nat outside duplex auto speed auto no mop enabled ! interface FastEthernet0/1 description $ES_LAN$ ip address 192.168.200.1 255.255.255.128 ip nat inside duplex auto speed auto no mop enabled ! ip default-gateway 10.32.32.1 ip classless ! ip http server ip nat pool pool1 192.168.200.1 192.168.200.1 netmask 255.255.255.128 ip nat inside source list 1 pool pool1 overload ! access-list 1 permit 192.168.200.0 0.0.0.254 dialer-list 1 protocol ip permit ! control-plane ! ! line con 0 line aux 0 line vty 0 4 password [redacted] login ! end
Is there anything obviously wrong with this? Or is it just a problem in the host network's config that's preventing me from accessing the internet? (Computers outside this subnet CAN access the internet)