Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

Is there any realistic way to convert a WinXP Pro system to VMWare or VirtualBox (p2v) without the original systems hardware?

I have a ghost image (it's a .gho, unfortunately not .sv2i) of the original system, but the hardware was completely destroyed so running the standard p2v tools isn't easily possible.

share|improve this question
add comment

5 Answers

up vote 0 down vote accepted

Have you tried restoring the Ghost image into a VM guest? Depending on what actual drivers are displaced, there is a chance that the restored image can work with some driver replacements.

share|improve this answer
    
tried but ended up with a BSoD –  Citricguy Aug 8 '11 at 13:46
    
Trying again, but going to run a cold-clone ardamis.com/2009/04/25/cold-cloning-vmware-converter on the newly restored Ghost Image –  Citricguy Aug 9 '11 at 2:35
    
This along with the link in the 2nd comment worked beautifully. :) –  Citricguy Aug 9 '11 at 5:02
    
Glad that it worked out, good info with the link in the 2nd comment! –  user48838 Aug 9 '11 at 5:34
add comment

VMware vCenter Converter Standalone can convert many different images to the VMware format.

You can download it for free from the VMware website:

  1. http://www.vmware.com/products/converter/

  2. http://www.vmware.com/go/getconverter

Good luck!

EDIT: Good find by Citricguy: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1003228

Only .sv2i ghost images are supported.

share|improve this answer
1  
forgot the converter will go direct from .gho's to vmdk's! –  tony roth Aug 8 '11 at 16:02
1  
It seems only .sv2i Ghost images are supported. kb.vmware.com/selfservice/microsites/… These seem to require an image created using a running system (hot-backup) –  Citricguy Aug 9 '11 at 2:34
add comment

This knowledge base entry explains how to do this. Requires Ghost Solution Suite 2.5, vmware 6 or newer

You can change a ".gho" file to a ".VMDK" file using the DOS version of the ghost.exe, the Linux version of ghost.exe or ghost32.exe. To change the file, run ghost with the following command line:

  -clone,mode=restore,src=< path\file >.gho,dst=< path\file >.vmdk
share|improve this answer
add comment

restore the the .gho to another hard disk don't boot the result, take that hd and hook it up to another workstation server etc and run disk2vhd against that disk! That will boot as a vm under hyper-v or if converted with vmware.

share|improve this answer
    
Jakob's method is the most correct answer. –  tony roth Aug 8 '11 at 16:12
add comment

If you have genuine Ghost (rather than the ersatz "Norton Ghost" product squatting on the brand in the consumer space), then Ghost Solution Suite 2.5 contains a tool called DeployAnywhere which is similar to the "Restore Anywhere" capability used in the low-end consumer product (Deploy Anywhere started in essence as a port of Restore Anywhere to a more general-purpose codebase).

DeployAnywhere can do a number of things, but mainly it tries to inject the best choices it can find for the mass storage and network driver classes into the target system so that it will boot. VMWare Converter is a great tool, but a process involving DeployAnywhere works equally well for P2V conversion for other virtualization systems such as VirtualBox and Virtual Server.

share|improve this answer
    
Going to purchase this if my cold-clone via VM fails. –  Citricguy Aug 9 '11 at 2:35
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.