Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I am trying to connect to an iScsi array (hosted on a QNAP 859URP+) from my W2K3, via a 2nd NIC.

I have my QNAP 859URP+ connected through LAN1 to my switch. It gets it's IP from our DHCP server.

I want to connect LAN2 directly to the server. I have the following settings:

QNAP LAN1 (connected to switch)
IP: 192.168.0.9
MASK: 255.255.255.0
Gateway: 192.168.0.254


QNAP LAN2 (connected to the 2nd NIC on the server)
IP: 192.168.111.1 (default)
MASK: 255.255.255.0
Gateway: NONE

On the server, the 2NIC that is connected to the QNAP LAN2 has the following:

IP: 192.168.111.2
MASK: 255.255.255.0
GATEWAY: NONE

(first NIC is DHCP'ed)

I am able to ping to the 192.168.111.1 from the server (and not from any other pc/server on the network - that's good), but when trying to access/add from the Windows iScsi Initiator - I get an error: connection failed.

  • Port is the default 3260
  • no firewalls are installed

What am I doing wrong?

share|improve this question
    
I have found the problem to be a security setting on the QNAP. I have limited access to the QNAP from IP range of: 192.168.0.1-254. Changing that solved the problem –  Saariko Aug 24 '11 at 14:56

1 Answer 1

up vote 1 down vote accepted

I have found the problem to be a security setting on the QNAP. I have limited access to the QNAP from IP range of: 192.168.0.1-254. Changing that solved the problem

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.