Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I have a problem installing Windows 2003 Standart in a DL180 G6 using the Easy Set-Up CD provided by HP, Windows installation process return:

"The following value in the .SIF file used by setup is corrupt or missing, Value 1 on line 0 in section 'keyboard' setup cannot continue . to quit press F3"

I have tested with several keyboard always with the same results. Know someone what is malfunctioning?

I'm using a USB stick to load the Easy Set-Up CD and the Windows image because the server has not optical devices and there is no PS2 port in this server.

PS: Disk controller not detected in a clasical windows installation. (I prefer to avoid nLite)

Thx!

share|improve this question
add comment

1 Answer

Have you tried the front and rear USB ports for keyboard input? Do you have a USB CD/DVD drive to try with for the purposes of loading the Easy Setup disc and potentially the current firmware DVD? Also, there's a chance that a newer release of the Easy Setup CD than what you currently have is available for the server.

share|improve this answer
    
I agree with ewwhite, more than likely the making of your USB image did not go well, try re-creating the image otherwise get a USB CD/DVD drive for $40.00 –  Tom Aug 31 '11 at 23:22
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.