Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

Is there any way to test the 'cleanliness' of the power your are getting at your PC from the UPS and also from the wall?

I have a powerful workstation (Dell T7400) that is now on its 3rd PSU in 30 months (all under warranty thankfully), but 3PSU's seems like a lot to go thru in 2.5 years, especially given that I have owned over 20+ machines in the last 15 years and never had a PSU fail on any other machine.

I have a 10 year old APC SmartUPS 2200NET, (now on its 2nd set of batteries), but I wonder if over time they start to give off 'dirty' power that maybe contributing to the premature failure of my PSU's? I don't know enough about elextricity to quantify what I mean by 'dirty' power, but the dell tech that swapped out my PSU's suggested I may want to look into it.

I just bought a newer, (expensive) workstation I to be honest I am afraid to plug it into the UPS, but at the same time don't want to drop another $500-$1000 on a UPS without a need.

share|improve this question

3 Answers 3

up vote 5 down vote accepted

Clean power is determined with an oscilloscope and frequency meter. A voltmeter isn't enough, it only shows you RMS voltage to let you know the system is supplying power and if it's capable of supplying voltage at the load you have on it. For the SmartUPS 2200, nominal output is 120V with a less than 5% variance at full load.

The frequency meter tells you how well the UPS is calibrated to output 60Hz power. It can go off tolerance over the years. The SmartUPS is supposed to sync with the grid as long as it's got power and hold the frequency to 57 - 63 Hz when delivering offline power.

The oscilloscope is necessary to make sure you're getting a clean sine wave without power spikes, noise, etc. which is what "clean power" is all about. Some of the original UPS systems output a square wave or stepped square wave attempt to simulate the normal sine wave delivered by the power company. APC systems like your SmartUPS 2200 are spec'd to deliver sinewave output, but if the output switching transistors are having problems, this may have distortion, stepping or noise disrupting the delivery of a clean sine wave output.

Also, at 10 years old, I would also suspect any MOV protection the system has to offer has degraded pretty badly. Metal Oxide Varistors can only take so many power outages, spikes, etc before they lose their ability to suppress the hash spikes that are thrown at them.

share|improve this answer

Should be able to do this with a good multimeter. I've never done this with a wall outlet, but you'll want to be really carefull about how you do it. Looks like there are different classes of multimeters that can handle different loads. Make sure the one you're using can handle that kind of output.

I have seen replacement parts sent, that right out of the box were faulty. So you could just be the lucky one that keeps getting bad PSUs.

share|improve this answer

These concerns are probably unfounded. All but the cheapest knockoff power supplies have long provided filtering for the AC input power. This capability existed several decades ago in the form of inexpensive component bypass filters and decoupling, but are far more advanced and efficient now.

If you have gone through three Dell power supplies, maybe that particular model has a known issue and you should consider a third-party alternative. It isn't unheard of. I've seen bad batches of power supplies in a wide variety of equipment. You can get an excellent power supply for $150 or less.

share|improve this answer
    
Care to recommend a particular brand or provide a link? Next time one goes bad I may try another brand. –  EJB Sep 11 '11 at 17:57
    
ABS has a good line, although there are many reputable vendors. I've seen the ABS MJ1100-M for $180. abs.com –  Greg Askew Sep 11 '11 at 23:40

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.