I've got two windows PCs connected by gigabit ethernet.
When I use iperf to measure throughput it maxes out at a good 100MBit/s.
When I run iperf using two or three parallel connections, each will get the full 100MBit/s, too.
If I add all the parallel connections there should be a maximum speed of nearly 400MBit/s possible, so I gather that the 100MBit/s per connection is some kind of throttling.
I need maximum speed between these two computers, is there any way to disable this throttling so the full throughput can be used by one single connection instead of being shared between more of them?