Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I've gotten my Cisco 1142n autonomous AP configured with every option under the sun, but I still can't get dynamic VLAN assignment working!

I verified the following:

  • I give priority to VLAN assignment via RADIUS with aaa authorization network default group radius
  • The encryption across all VLANs which might be assigned is the same
  • Using debug radius auth I can tell that the AP is receiving the appropriate RADIUS attributes
  • I've ensured that the necessary broadcast messages are being sent (on capability and membership changes)

Long story short, I'm pulling my hair out like you CANNOT believe. What am I missing?

Here's my running config: http://dpaste.com/hold/621393/

Thank you SO much in advance for any help you can provide!

share|improve this question
add comment

1 Answer

According to https://supportforums.cisco.com/thread/2171534 it's impossible without an WLC. I came to this conclusion after trying the same thing for hours.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.