Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I have configured Remote FX on our Windows 2008 R2 SP1 Remote Desktop Session Host by following this guide:
http://technet.microsoft.com/en-us/library/ff817595%28WS.10%29.aspx
However, when I connect via my Windows 7 SP1 client to the server and I verify the eventlog (where event 1000 and 1001 should appear) there are no events.
I used this info to verify the events:
http://technet.microsoft.com/en-us/library/ff817580%28WS.10%29.aspx
Trying to watch multimedia on the RDSH server is still very choppy.

Is there anything I'm missing or something else I could check to get this to work?

share|improve this question
    
What hardware do you ahve for the graphics card? What drivers? –  TomTom Sep 30 '11 at 14:19

1 Answer 1

I encountered a similar issue while testing RemoteFX today, and it was a problem with the Remote Desktop Connection settings. Ensure these two things are done within the RDC (mstsc.exe) on the client:

  • On the "Display" tab, have 32 bit colour checked
  • On the "Experience" tab, have LAN (10 Mbps or higher) set
share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.