Take the 2-minute tour ×
Server Fault is a question and answer site for system and network administrators. It's 100% free, no registration required.

I have a server with Win2008R2 and a synology NAS. On the Nas there are 6 iSCSI partitions which are mounted on the windows server. The windows server is virtualized under Hyper-V.

After rebooting the client machine, two of the 6 partitions do not remount and I have to manually remount them... every time.

Each one has a similar configuration and has been configured with CHAP authentication. All 6 appear in the favourites list.

Event log shows no errors regarding iSCSI. The other 4 partitions mount without problems.

Any suggestions for further debugging?

share|improve this question
    
Have you checked the logs on the NAS? –  Joseph Kern Oct 26 '11 at 1:03
    
Good thinking, I hadn't checked that. However, it doesn't say anything. The log is almost empty. –  Ian Murphy Oct 26 '11 at 11:06

2 Answers 2

up vote 6 down vote accepted
+50

Apart from Favourites list have you checked if the volumes are listed in Volumes and Devices tab in iSCSI initiator properties? And are they set to Auto Configure?

This should (in theory) make sure that all volumes are initialized.

Auto Configure Volumes

Source

share|improve this answer
    
This list is empty on this server and every other server I have using iSCSI. Any idea what purpose this serves as against the favourite targets. They appear to do the same. Favourites are reopened after rebooting, and so are what appears in this list. Saying that, I've just tried out the 'auto configure' button and it has added drives in the form D:\, E:\, etc and not as appears in your screenshot above. Odd, no? I seem to remember trying this in the past and not finding it useful. –  Ian Murphy Oct 26 '11 at 10:43
    
According to the second paragraph in the dialog, you should have your initiator in the Favorites, and your individual devices in the Volumes and Devices. You could try removing all of the devices, then add them back in via the Auto Configure button. –  Joseph Kern Oct 26 '11 at 14:47
    
Thanks for the visual aid ;). Much appreciated. I too think clearing the devices and readding them back via Auto Configure could help. –  LukeP Oct 26 '11 at 21:28

Make sure add to favorites and enable muilti-path is selected when you connect to targets:

When you discover portal, click advanced, don’t use defaults click “Microsoft iSCSI Intiator” and you’re NIC IP for Initiator IP.

share|improve this answer
    
I tried all the suggestions above and I still see targets not remounting. This occurs on all versions of windows and at multiple clients. It also occurs with different makes of Nas, so it can't be down to a poor Nas implementation... unless they're all based on the same libraries. Perplexed to say the least. I should also mention that I have also seen luns disconnecting in windows when a Nas is rebooted. Some luns will reconnect, others will simply disappear. Others will remount but be offline in windows (occasionally) –  Ian Murphy Jun 20 at 12:14

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.