Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I'm hoping this question hasn't been asked before and I've spent the last 3 hours trying to find a solution to this but to no avail.

Also feel free to edit the tags, I'm fairly new to this site.

I have a bootable Windows Server 2008 DVD that I'm trying to install from on our new IBM x3250 M3 server. I've tested on my laptop that the DVD does indeed boot and it works perfectly.

Usually I can troubleshoot these issues but this EFI system is new to me, I'm used to using BIOS.

So here's what I've tried so far

  • Set CD/DVD as the first option in Boot Manager (Primary Boot Sequence). This prompts the message Press any key to boot from CD/DVD... but that fails with the message "Boot Failed. CD/DVD Rom"
  • Set the Secondary (WOL) Boot Sequence to CD/DVD Rom. I'm not even sure it gets to this step to be honest, Intel Boot Manager kicks in after failing the Primary Boot Sequence.
  • Tried Boot From File(EFISECTOR, ...., CD/DVD), selected EFI -> BOOT -> BOOTX64.EFI - A message comes up Press any key to boot from CD/DVD... but that fails too and returns to the previous screen.

I've now run out of ideas and am really keen to get this server up and running. Anyone that has any ideas please share them and I'll give them a crack.

Much appreciated.

share|improve this question
    
When option 1 "fails" what exactly does it fail on? What happens? –  Mark Henderson Nov 4 '11 at 7:28
    
@Mark: It just says "Boot Failed. CD/DVD Rom" –  Marko Nov 4 '11 at 7:29
    
Ah. How... Helpful! –  Mark Henderson Nov 4 '11 at 7:30
    
@MarkHenderson, yeah tell me about it. It then goes through the rest of the options, i.e. Boot Failed - Floppy Disk, Hard Disk 0 etc.. –  Marko Nov 4 '11 at 7:30
add comment

2 Answers

up vote 2 down vote accepted

I had just a similar problem. You could try IBM Serverguide v8.43. It worked well with SBS 2011 x64.

share|improve this answer
    
This is what I'm currently researching. Do I download and burn the toolkit .iso to a disk and boot from that first? –  Marko Nov 4 '11 at 8:07
    
Yes, exactly. The setup asks for the server 2008 installation disk after the configurations. –  JohannesM Nov 4 '11 at 8:16
    
This worked beautifully :) –  Marko Nov 4 '11 at 10:36
add comment

For the record, I recently had a similar problem with the same model server (x3250 M3), but it was for a custom linux distribution (untangle). I was able to boot from the DVD and begin the installer, but after that the installer was no longer able to access the DVD drive. To complete my installation, I had to then remove the DVD from the drive and insert it into a USB DVD drive that the installer could detect.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.