Take the 2-minute tour ×
Server Fault is a question and answer site for system and network administrators. It's 100% free, no registration required.

What measures can be taken to reduce the sound noise levels coming from computers (i.e. sound noise from fans, hard drives etc.) in an office space setting or home setting?

share|improve this question

8 Answers 8

up vote 7 down vote accepted

In my experience,

  1. Replace crappy factory fans (CPU, GPU, and power supply) with quality fans. The bigger the fan, the better - a bigger fan typically needs to move less air than a small fan to produce the same effect (yes, I know it's oversimplified, but there you go.)

  2. Replace video cards with passive cooled versions, or even get rid of discrete video cards entirely. If you don't care about desktop effects (office users normally shouldn't) you can lower noise levels considerably.

  3. Not much you can do about hard drives as such (barring replacing them with SSDs, as pointed out by InSciTek Jeff in the comment below.) You can try improvising some rubber grommets and drive the mounting screws through them - I don't know how much that will gain you, though. Please don't take stupid advice like "reduce vibration by letting your drive hang freely in an improvised rubber band hammock" like this, otherwise you'll be in for a nice surprise the next time your foot, your baby or you dog bumps against the case.

  4. Use a good case. I'm using an Antec P182 for my desktop. If it's possible to be in love with a case, it's this one.

  5. Check silentpcreview.com every so often. Don't take it as gospel, though, they're sometimes partisan, and not all contributors are sane (see the HDD hammock idea above.)

share|improve this answer
1  
You can replace your hard drives with SSD(s) for complete noise elimination and also improved performance with the good ones. –  Tall Jeff May 2 '09 at 22:37
    
Thanks, didn't consider that (SSDs are still either horrendously expensive or horrendously crappy, so they're not on my radar :D). Updated the answer and credited accordingly. –  Mihai Limbăşan May 2 '09 at 23:11
1  
Just to add to the [great] point listed... do your research ahead of time when looking to buy a replacement fan, card, etc. Prevent unexpected results and do the proper research before laying down the dough. –  Matt Hanson May 3 '09 at 6:12
1  
Don't forget to ground your HDD if you use the rubber grommets. –  pcapademic Jun 1 '10 at 19:23
    
New small 10,000 rpm 2.5 drives are nearly silent, except for the whispered chirk, chirk the heads make. –  Fiasco Labs Sep 4 '13 at 6:03

This might not be the answer you're looking for but:

  • Move your desktop box, under your desk (or further away from you.)
  • Increase other sound sources... music or my favourite air conditioning.

At the office I can't hear my PC at all. Unless the air conditioning is switched off, then EVERYTHING sounds loud.

share|improve this answer
    
-1 Increase other sound sources? Nice try... –  Nick May 2 '09 at 22:59
    
It works........ –  Bravax May 2 '09 at 23:00

laptop CPUs - especially the new atom processors use very little power, and the fan can be configured to come on only when necessary (and at variable speeds). I have a netbook, and the fan rarely runs (only when I'm watching videos or something)

Solid State Hard drives are silent.

You could set up a 2 machine system where the noisy powerful machine is in the basement, and a nearly silent "thin client" remote-desktops to the powerful machine to do its work.

Soft rubber feet under the computer can prevent fan noise from transferring to the desk / operating surface.

There seems to be a wide variation in noise levels from DVD drives. Choose a quiet one.

share|improve this answer
    
+1 for thin-clients as a solution to computer noise. Obviously this depends on what sort of applications you're planning to run, but if your user can work in remote desktop, this is definitely a cheap and quiet way to go! –  Peter Bernier Jun 23 '09 at 15:03

One small tip: Larger fans (diameter) run quieter than small fans.

share|improve this answer

Water cooling (with a decent pump) or reduce the fan speed. To reduce hard disk noise you can get vibration dampening screws.

share|improve this answer
  • Passive cooling where possible
  • Replacing fan cooling with water cooling
  • Larger, slower revolution fans
  • Using fans with variable revolution speeds that can monitor temperature and alter speeds accordingly
  • Noise damping for hard disk - Usually entails rubber grommits or padding
  • -
share|improve this answer

Good options above. Other options (of varying sophistication) are:

  • Put the box behind a divider with acoustic dampening properties. You can buy these in studio sound equipment catalogs. Also, as I understand it, the standard office cubical dividers are intended to have similar properties, although it may be that cheaper versions don't bother living up to that.

  • The old-fashioned method: put the server in one room, access it with a nice quiet laptop or very simple terminal. Not so good for intensive graphics (although modern ethernet options and modern remote desktop protocols help), but with laptops like the iBook, or a true hardware terminal as once used in libraries etc., this can be VERY quiet.

share|improve this answer

Change the setting in the BIOS (if there is one) to turn the CPU fan on, at a specific temperature, rather than always being on.

share|improve this answer

protected by Michael Hampton Sep 4 '13 at 5:58

Thank you for your interest in this question. Because it has attracted low-quality answers, posting an answer now requires 10 reputation on this site.

Would you like to answer one of these unanswered questions instead?

Not the answer you're looking for? Browse other questions tagged or ask your own question.