up vote 0 down vote favorite
share [g+] share [fb]

I have a 2960 that I need to limit the uplink port to 50Mbps for 3 vlans and 350Mbps for another vlan. Would the following config achieve that or is this even possible for the 2960?

class-map match-any VLAN50-51-52
 match vlan 50-52
class-map match-any VLAN53
 match vlan 53

policy-map 50MB_RATE_LIMIT
class VLAN50-51-52
police 50000000 5000000 exceed-action drop
class VLAN53
police 350000000 35000000 exceed-action drop

!
interface GigabitEthernet0/23
service-policy output 50MB_RATE_LIMIT
service-policy input 50MB_RATE_LIMIT
link|improve this question
96% accept rate
feedback

Know someone who can answer? Share a link to this question via email, Google+, Twitter, or Facebook.

Your Answer

 
or
required, but never shown
discard

Browse other questions tagged or ask your own question.