i have an HP X1400 Storage Server with 4x 1TB HDD´s. Now i replace them with 4x 2TB HDD´s but the system shows only 4TB, can anybody help me? Sorry, i´m the first time here.... It was an HP AP786B X1400, it comes with Windows Storage Server 2008 Standard and 4x 500 GB SATA 7.2k LFF MDL HDDs. I removed them and put 4x HP 507632-B21 2TB SATA 7.2k LFF Hot-Plug into the machine. Than I made an recovery from the recovery DVD but after that the system shows only 4x 500 GB instead of 4x 2TB.... Thanks for your help and sorry for my english
As it currently stands, this question is not a good fit for our Q&A format. We expect answers to be supported by facts, references, or expertise, but this question will likely solicit debate, arguments, polling, or extended discussion. If you feel that this question can be improved and possibly reopened, visit the help center for guidance.If this question can be reworded to fit the rules in the help center, please edit the question.
It's a software RAID, I believe, based on the HP Quickspecs. Can you see the additional hard drive space in the Windows Disk Management MMC?