Take the 2-minute tour ×
Server Fault is a question and answer site for system and network administrators. It's 100% free, no registration required.

i have an HP X1400 Storage Server with 4x 1TB HDD´s. Now i replace them with 4x 2TB HDD´s but the system shows only 4TB, can anybody help me? Sorry, i´m the first time here.... It was an HP AP786B X1400, it comes with Windows Storage Server 2008 Standard and 4x 500 GB SATA 7.2k LFF MDL HDDs. I removed them and put 4x HP 507632-B21 2TB SATA 7.2k LFF Hot-Plug into the machine. Than I made an recovery from the recovery DVD but after that the system shows only 4x 500 GB instead of 4x 2TB.... Thanks for your help and sorry for my english

share|improve this question

closed as not constructive by ceejayoz, Chris S, warren, MDMarra, Ward Aug 11 '12 at 18:59

As it currently stands, this question is not a good fit for our Q&A format. We expect answers to be supported by facts, references, or expertise, but this question will likely solicit debate, arguments, polling, or extended discussion. If you feel that this question can be improved and possibly reopened, visit the help center for guidance.If this question can be reworded to fit the rules in the help center, please edit the question.

1  
How did you replace them? what exact method –  Chopper3 Nov 17 '11 at 16:08
1  
You didn't give any information on how you did the upgrade, what the partitioning is showing, if it is using RAID,...? –  Bart Silverstrim Nov 17 '11 at 16:08
2  
You should read How to Ask –  MDMarra Nov 17 '11 at 16:11

1 Answer 1

It's a software RAID, I believe, based on the HP Quickspecs. Can you see the additional hard drive space in the Windows Disk Management MMC?

share|improve this answer
    
No i can.t ´see it, it shows 4x 500GB –  Stefan Nov 17 '11 at 16:44

Not the answer you're looking for? Browse other questions tagged or ask your own question.