I am attempting to configure a user to work remotely. The individual has DSL with a Westell Versa Link modem/router.
We are using a Cisco RV120W to create the IPSec VPN Tunnel to our Cisco Pix. Everything is setup correctly and I have tested it with my personal cable connection, connecting directly to my cable modem. After changing the Pix to the remote users IP address (static), the user can not access the internet or the company network from a computer attached to the RV120W.
Does anything special need to be done because the device creating the IPSec VPN is on the inside of the users modem/router?
