Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

Asterisk installed on Linux server by other admin.

I am trying to find out which communication protocol/technology is currently using on Asterisk? Eg: isdn, voip, acd, etc. I dont know which one is using.

The line connected on BT with ISDN or T1 Card on the server.

There are a lot of files in /etc/asterisk/

Which config file do I need to look at and detail that connect to BT line?

share|improve this question

closed as not a real question by voretaq7, MDMarra, Chris S, MadHatter, Khaled Nov 29 '11 at 21:14

It's difficult to tell what is being asked here. This question is ambiguous, vague, incomplete, overly broad, or rhetorical and cannot be reasonably answered in its current form. For help clarifying this question so that it can be reopened, visit the help center.If this question can be reworded to fit the rules in the help center, please edit the question.

2  
If the files in /etc/asterisk/ are blurry you should fix your monitor. ;-) –  ceejayoz Nov 29 '11 at 20:17
6  
Maybe, you need to start reading asterisk documentation. –  Khaled Nov 29 '11 at 20:23
add comment

1 Answer

Asterisk is primarily a VoIP server using SIP, RTSP, and IAX2. it does 'speak' other protocols as well.

T1 is a type of ISDN also; though ISDN PRI lines are usually voice and T1 is data, it's the same technology.

share|improve this answer
add comment

Not the answer you're looking for? Browse other questions tagged or ask your own question.