* Resolved by rolling back to DRAC6_FRMW_WIN_R279926.EXE *
Having an issue with a new R710 where I cannot enable IPv4 on the iDRAC card.
I have tried enabling IPv4 and setting static IP, Gateway ect however when saving the settings it fails. This has been done using the Dell Setup Disk & during boot (ctrl+E).
Dell OpenManage Server Administrator has been installed on the box which I can see the DRAC card is enabled (has mac address ect) but in the Remote Access - Additional Configuration menu I am not able to set IPv4 to enabled. Each time I click apply changes it reverts back to Disabled.
Bios ect are all up to date. Any help would be appreciated.
More Informatin; Device Type: iDRAC6 Enterprise IPMI Version: 2.0 System GUID: 4a35364f-c0c8-3480-3410-00364c4c4544 Number of Possible Active Sessions 5 Number of Current Active Sessions 0 Enable IPMI Over LAN: No SOL Enabled: Yes MAC Address: BC-30-5B-E9-CA-CF