Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I inserted a FET-10G (Fabric Extender Transceiver) SFP transceiver in my Nexus 5548UP and I got "access down" "SFP Validation Failed" in show interface.

FET-10Gs came with my 2232's so I figured they'd be plug and play. This is with a blank port configuration.

How do I get past "SFP Validation Failed" on a FET-10G transceiver on a Nexus 5548UP?

share|improve this question
    
What version are you running on the 5548? –  Joseph Dec 11 '11 at 22:45
    
This is not a duplicate. Please reopen. The solution for this is different. I know the answer and was trying to get this on ServerFault so other people running into it would have an easy answer available from Google. –  Alain O'Dea Dec 13 '11 at 2:26
1  
I also fell for the temptation of just skimming over the text where it says FET-10G here and SFP-GE-T there and wondered for a while why you would want a nearly exactly duplicate question re-opened - the wording is quite similar –  syneticon-dj Dec 14 '11 at 18:34
1  
Is the solution different between the two? Why not simply update the other question/answer to apply to both? –  Zoredache Dec 14 '11 at 20:18
    
Are you sure it's not counterfeit? Did you check the serial number? –  MikeyB Dec 14 '11 at 20:23
show 6 more comments

1 Answer

up vote 2 down vote accepted

Setting the port's switchport mode to fex-fabric will clear the SFP Validation Failed message. You can do this while the SFP transceiver is inserted.

Example setting up port 1 to allow fabric extension:

conf
int e1/1
switchport mode fex-fabric

The trouble is the order in which I thought this would work. I was trying to verify the transceiver hardware before getting into software configuration of the ports, but the transceiver expects a certain configuration first. This configuration can be changed while the transceiver is inserted.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.