Take the 2-minute tour ×
Server Fault is a question and answer site for system and network administrators. It's 100% free, no registration required.

One of sas hd of this ML350 died... We're buying a new one and I wanted to ask if I can just take out the faulty one and insert the new one with the server on to let it rebuild the raid or I'm forced to reboot using hp cd to achieve this result.

Thanks to all.

share|improve this question

2 Answers 2

up vote 6 down vote accepted

The RAID rebuild on HP servers is automatic if you're using a Smart Array RAID controller. Assuming a Smart Array P410 array controller, all you'll need to do is insert the replacement hard disk to initiate the rebuild.

The details of how the Smart Array handles drive failures and rebuilds are described here in the HP Smart Array controller technology brief.

share|improve this answer

If you RAID is hot swap it will rebuild. Before pulling the drive check in the HP management agent and check it says that "HOT Swap" is enabled. Also what is the RAID Version? As pulling a drive that isn’t in a HOT Swap RAID will cause you more issues than it’s worth.

share|improve this answer

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.