Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

Have a tomcat web application running across 6 servers.

3 In our primary site and 3 in the DR site

Our networking team setup 2 sets of load balancing

First layer is Site Level, splits traffic 50/50 between Primary and DR

Second layer is on each site to distribute traffic to each of the 3 servers in that site.

The problem I see occurring is 2 out of the 3 servers in a site will go down, and a single server is now handling 50% of our overall traffic.

Would it not make more sense to remove the first layer and just operate all 6 servers on a single loadbalancer?

There are no shared sessions or user data between the servers, If the server a user is on goes down they need to log out and back in.

The load balancing is also only used for login, everything else after that is strictly direct client to server communication.

share|improve this question
    
How could anyone of us tell you if your performance requirements for your application are met and the setup makes sense if 2 ouf of 3 boxes per site are down?! –  pfo Jan 4 '12 at 18:13
    
My question is if all 6 servers are up and running, servicing client requests. Why would you not have a single load balancer distributing traffic to all 6 servers. Sorry if my initial post was unclear. –  Keibosh Jan 6 '12 at 16:30

1 Answer 1

It adds another layer of redundancy, and that may well be the thinking of your network team (although I recommend asking them!).

If you rely on only one load balancer, and it becomes unavailable (unit failure, or DC network /power outage), then you don't have a contingency. With your current config, if you had to you could (presumably) re-point your DNS records to a specific site, and still have traffic load balanced over 3 servers. I guess something similar could be done with hot-spare load balancers in each site that are not used under normal conditions (but unused network hardware makes me uneasy; will it work nicely when you hit the 'on' button?).

Another aspect is the method used for the load balancing. If you choose to use 1 load balancer to 2 different sites, it becomes much more likely that you will need the load balancer to act as a proxy, since you won't be able to perform other forms of network-trickery, such as MAC switching/Direct Routing. More here: http://www.linuxvirtualserver.org/VS-DRouting.html, which is very fast. And the other drawback with a proxy is that you normally need the return traffic to go back through it, whereas in a DR scenario the server can reply directly to do the client, meaning there is less of a bottleneck; sometimes you can make better use of bandwidth this way and reduce latency (dependent on the rest of the architecture obviously). So it's worth considering the methods that are currently used, at both tiers of your setup.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.