Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

We have 2 servers which have 6 SATA 7200 disks inside (each). We want to configure both servers so that they will have Window Server 2008 R2 Enterprise installed and on top of it Exchange 2010 x2 (for 300 people) as one virtual machine and AD x2 as another virtual machine and maybe some additional VM's (but not that much.

Now we are asking ourselves if it's better to create 3 RAID groups RAID 1 or (RAID 1 and RAID 10 scenario). We're looking for performance and protection. Of course SATA drives were choose because of costs and there's no real option to choose something else.

Idea 1:

  • Raid A -> 2 x 1TB (RAID 1) -> C partition for system + D partition for Exchange logs
  • Raid B -> 2 x 1TB (RAID 1) -> E partition - all virtual machines
  • RAID C -> 2 x 1TB (RAID 1) -> F partition - exchange database

Idea 2:

  • Raid A -> 2 x 1TB (RAID 1) -> C system partition + exchange logs
  • Raid B -> 4 x 1TB (RAID 10) -> all virtual machines, exchange db

Idea 3:

  • Raid A -> 6 x 1TB (RAID10) -> system, all vm's, exchange db, exchange logs

Idea 4:

  • ?

Which of the option is the best? Will having RAID 10 on 4 drives mitigate the problem of putting multiple stuff on one big drive so access speed may be slower if all things at once hit the same target?

share|improve this question

1 Answer 1

up vote 3 down vote accepted

Just use one bit 6-way RAID10 array per server, it's kind of pointless doing anything else as you're using such slow drives and you'll lose some IO performance due to virtualisation anyway (you didn't mention hypervisor or disk access method by the way).

share|improve this answer
    
We will use Hyper-V (as per topic) on top of Windows Server 2008 R2. We will use pass-thru disks most likely. –  MadBoy Jan 9 '12 at 13:52
    
Also would Exchange benefit from having faster drives? –  MadBoy Jan 9 '12 at 13:53
    
Missed that in the topic sorry :( –  Chopper3 Jan 9 '12 at 13:53
1  
+1 Just one big RAID10, you'll need to squeeze every bit of performance out of those SATA disks that you can. It's probably too late but I would not run SATA disks as hypervisor storage. –  Chris S Jan 9 '12 at 13:55
1  
I would NOT o with passthrough discson that pathetic level - and I would say that the disc layout is pathetic for a server of that size to start with. I would go with SuperMicro servers. 24 (!) disc slots in 1 HE. Put in a decent raid card (Adapted, ! series with SSD cache) and start with 12 disc per server. FAST discs - 10k rpm minimum. Raid 10. Add 2 discs as SSD cache. THEN you get perormance. WIth your latyout above youa re limited by IO right from the start. –  TomTom Jan 9 '12 at 13:59

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.