I haven't worked with IPv6 outside of 4to6 tunneling on my home pc with stuff like GoGoNet. I've read about how it works in a general way. No NAT required (or suggested) and each client uses a public ipv6 address and I understand the continued use of firewalls. From my understanding, without the use of NAT, UAL and getting ARIN to give you own global range, that would mean the ipv6 address on all the systems on your lan would be from a range provided by your isp. What would happen in the case you change your ISP? Would that mean you have to change your whole lan address range?
In a typical ipv4 windows shop I might have a situation like such:
Site1 Lan IPs: 192.168.1.0/24 Site2 Lan IPs: 10.0.0.0/24 Site1 Public IP: 184.108.40.206/29 (220.127.116.11 - 18.104.22.168 usable) Site2 Public IP: 22.214.171.124/29 (126.96.36.199 - 188.8.131.52 usable) Site-to-site VPN via firewalls Site1: Lan IP, Public IP:Port Hardware firewall/router - 192.168.1.1, 184.108.40.206 Windows AD DC server (AD DNS server) - 192.168.1.10 Windows Exchange (email) - 192.168.1.11, 220.127.116.11:25+443 Windows RDS (term server) - 192.168.1.12, 18.104.22.168:3389 Workstations (via DHCP) - 192.168.1.100+ Site2: Hardware firewall/router - 10.0.0.1, 22.214.171.124 Windows AD DC server (AD DNS server) - 10.0.0.10 Windows IIS (webserver) - 10.0.0.11, 126.96.36.199:80 Workstations (via DHCP) - 10.0.0.100+
The servers have statically assigned lan ips, the DNS servers has to and the others are also, since the firewall does port forwarding to servers via ip addresses you type in (vs hostnames).
Now if I wanted to setup this as a ipv6 only environment? Would everything still be the same with statically assigned servers and dhcpv6 to workstations?
But then if I switch to another isp would that mean I need to change the ip address for all the servers? What if I have 100 servers? I guess I can use dhcpv6 on the servers but I haven't seen a biz-class firewall that allowed port forwarding via hostname or internal dns (sonicwall, juniper, cisco, etc) just local ip (atleast for ipv4). And DNS server still need static ips eitherway.
Also wouldn't that mean that during transition of changing lan ipv6 ips, my servers might be sending lan traffic over the internet to my old block since it's no longer local lan? Atleast in a technical terms, I understand it's unlikely someone would use the old block that quickly and that it can be blocked on the firewall.
I sounds like it would be great for everyone to get their own perm assigned ipv6 block but I understand it would make the global routing table unusably large.
Update Based on answers below, I updated the example location above and so this would be the ipv6 equivalent?
Site1 ULA: fd80::192:/64 Site2 ULA: fd80::10:/64 Site1 Public IP: 2000:1112:1301::/48 Site2 Public IP: 2000:2030:4001::/48 Site-to-site VPN via firewalls Site1: Link-Local, ULA, Public Hardware firewall/router - fe80::1, fd80::ABCD:1, 2000:1112:1301::1 Windows AD DC server (DNS) - fe80::10, fd80::ABCD:10, 2000:1112:1301::A Windows Exchange (email) - fe80::11, fd80::ABCD:11, 2000:1112:1301::B Windows RDS (term server) - fe80::12, fd80::ABCD:12, 2000:1112:1301::C Workstations (via DHCP) - fe80::100+, fd80::ABCD:1xx, 2000:1112:1301::10+ Site2: Link-Local, ULA, Public Hardware firewall/router - fe80::1, fd80::ABCD:2, 2000:2030:4001::1 Windows AD DC server (DNS) - fe80::10, fd80::ABCD:20, 2000:2030:4001::A Windows IIS (webserver) - fe80::11, fd80::ABCD:21, 2000:2030:4001::B Workstations (via DHCP) - fe80::100+, fd80::ABCD:2xx, 2000:2030:4001::10+
Each site own systems would would talk via Link-Local, Site-to-Site would talk with each other ULA (encypted by the VPN) and the world (including services) would talk via Public IPs?