Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I am having some trouble with the web interface for my new E3800 (3800-48G-4SFP+ Switch (J9576A)). I have two of them stacked in a ring topology. When I restore to the factory default and add an IP address for my LAN to the DEFAULT_VLAN. I can connect and it works. Then after a bit of customizing the web interface stops working. I can't figure out why. My running-config is below. As you can see, I don't have any of the ports in the "back" VLAN. Any ideas? Thanks!

HP Stack E3800# sh run

Running configuration:

; hpStack Configuration Editor; Created on release #KA.15.03.3004
; Ver #01:00:01

hostname "HP Stack E3800"
time timezone -5
time daylight-time-rule Continental-US-and-Canada
stacking
   member 1 type "J9576A" mac-address 082e5f-68xxxx
   member 2 type "J9576A" mac-address 082e5f-68xxxx
   exit
ip default-gateway 10.0.40.254
vlan 1
   name "DEFAULT_VLAN"
   untagged 1/1-1/52,2/1-2/52
   ip address 10.0.40.247 255.255.255.0
   exit
vlan 2
   name "back"
   no ip address
   exit
ip authorized-managers 10.0.40.54 255.255.255.255 access manager
snmp-server community "public"
oobm
   member 1
      no ip address
      exit
   member 2
      no ip address
      exit
   no ip address
   ip default-gateway 10.0.40.254
   exit
vlan 1
   ipv6 mld
   exit
vlan 2
   ipv6 mld
   exit
password manager
share|improve this question

1 Answer 1

up vote 1 down vote accepted

I found the answer!! I was configuring the OOBM interface which must automatically turn off the WebGui through the a VLAN. I needed to do the following;

disable the OOBM

enable "management-vlan 1"

Make my ip an authorized manager

Commands: (once in the config context)
oobm disable
management-vlan 1
ip authorized-managers myIP
share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.